Blue Titanium Flat Plate Solar Collector For Solar Water Heater

JinYi flat plate solar collector can be integrated with your existing hot water system to accommodate up to 80% of your hot water requirements. In addition to domestic hot water system, our collectors may also be used in radiant floors and base board heating systems.

Flat Plate Solar Collector are typically recommend for use in warmer climates simply because they are designed with larger absorber areas that are not insulated from the colder weather. The JinYI flat panel prove to be more efficient in colder climates and are recommended for use is these areas.

 Diagram

 1. Safe and steady

Flat panel uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;

2. Pressurized operating

Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.

3. High heat efficiency

Absorbing coating of the collector is black chrome and blue sputtering; absorbing rate is 92-96%, and emission rate is 5%-15%; heat efficiency is high

4. Good temperature preservation

Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24

5. Long using life

Inner tank is 1.2-2.0mm stainless steel; resist high temperature and corrosion; 15 years using life.

6. Several models fulfill different user need

According to customers’ requirement, we put our several modes with different specifications to suit flatlet, villa, hotel and factories. , etc

7. Easy installation

Parameter table