Blown film grade FJ00952 high density polyethylene SABIC FJ00952 HDPE granules for packaging film and shopping bags
Specification Sheet
SABIC FJ00952 High Density Polyethylene for Blown Film | |||
Physical properties | Ratings (metric) | Ratings (in English) | Test method |
Density | 0.952 g/cc | 0.0344 lb/in³ | ASTM D1505 |
thickness | 15.0 microns | 0.591 mil | |
Melt flow rate | 0.050 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.050 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Melt flow rate | 9.0 g/10 min @Load 21.6 kg, Temperature 190 °C |
9.0 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
Tensile strength (MD: yield) | 33.0 MPa | 4790 psi | ASTM D882 |
Tensile strength (TD: yield) | 31.0 MPa | 4500 psi | ASTM D882 |
Elongation at break(MD) | 400% | 400% | ASTM D882 |
Elongation at break(TD) | 550% | 550% | ASTM D882 |
Elmandorf anti-tear strength (MD) | 12 g | 12 g | ASTM D1922 |
Elmandorf anti-tear strength (TD) | 60 g | 60 g | ASTM D1922 |
Elmandorf anti-tear strength (MD) | 0.800 g/micron | 20.3 g/mil | ASTM D1922 |
Elmandorf anti-tear strength (TD) | 4.00 g/micron | 102 g/mil | ASTM D1922 |
Hammer | 12.0 g/micron | 305 g/mil | ASTM D1709 |
Drop test | 180 g | 0.397 lb | ASTM D1709 |
Tensile strength (MD: fracture) | 60.0 MPa | 8700 psi | ASTM D882 |
Tensile strength (TD: fracture) | 56.0 MPa | 8120 psi | ASTM D882 |
Secant modulus (1% secant MD) | 1250 MPa | 181000 psi | ASTM D882 |
Secant modulus (1% secant TD) | 1500 MPa | 218000 psi | ASTM D882 |
VEKA softening temperature | 125 °C | 257 °F | ASTM D1525 |
Processing (melt) temperature | 200 - 235 °C | 392 - 455 °F | |
Blow-up Ratio (BUR) | 3.0 - 5.0 | 3.0 - 5.0 | |
Product Description: FJ00952 is a TNPP additive free, high molecular weight high density polyethylene copolymer grade specifically designed for blown film applications. Its high molecular weight, broad molecular weight distribution and high density combine successfully to give excellent extrudability with high film strength and rigidity.Typical Applications: FJ00952 resin is recommended for blown film extrusion. this product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. Films of this product can be readily treated and printed to give high quality graphics. |
|||
Pictures and applications
High density polyethylene (HDPE) is an opaque white waxy material, non-toxic and odorless, with a specific gravity of 0.941~0.960. It is soft and pliable, but slightly harder and slightly longer than LDPE.
Advantages: acid and alkali resistance, organic solvent resistance, excellent electrical insulation, low temperature, can still maintain a certain toughness.The surface hardness, tensile strength, rigidity and other mechanical strength are higher than LDPE, close to PP, tougher than PP, but the surface finish is not as good as PP.
Disadvantages: poor mechanical properties, poor air permeability, easy deformation, easy aging, easy to brittle, brittleness is lower than PP, easy to stress cracking, surface hardness is low, easy to scratch.Difficult to print, printing, need to carry on the surface discharge treatment, can not electroplate, the surface is dull.
Application: Used for extruding packing film, rope, woven bag, fishing net, water pipe;Low-grade daily necessities and shell injection molding, non-load-bearing components, plastic boxes, turnover boxes;Extrusion blow molding containers, hollow products, bottles.
Product name: Sabic F00952 FJ00952 HDPE granules
Product weight: 25KG/bag
Product origin: SABIC, Saudi Arabia
Product properties: good vertical elongation and extrusion, high strength, high stiffness
Product use: shopping bags, hose,sundry bags, thin high strength film
Similar products
Contact us