Black polypropylene camlock coupler Type D

• Product Descripton:
  

Black polypropylene  camlock coupler   Type D

1. Item: Type D coupler – Female Coupler by Female NPT
2. Size: 3/4", 1", 1 1/4", 1 1/2", 2", 3" and 4";
3. Gasket: NBR, EPDM, Viton, PTFE & Silicon;
4. Handles & rings: stainless steel
5. Threads: NPT/BSP;
6. Standard: MIL-C-27487;
7. Type: A, B, C, D, E, F, DC, DP;
8. Working pressure: depends on sizes & temperature;
9. Temperature range: - 15°F to +200°F (Water);
10. MOQ: 500 pcs;
11. Packaging: cartons.
12. Body material: polypropylene;

• Feature:

1. No tools required.

2. Lightweight yet high tensile strength.

3. Abrasion resistance.

4. Economical cost.

5. Durability.

• Sheet

Working pressure below is measured at ambient temperature. When temperature increases, operating pressure for polypropylene will decreases sharply.

   

Black polypropylene Type D camlock coupler – Female coupler by Female NPT, is normally used with Type A, E, F & DP adapters of the same size. Polypropylene camlock coupling is often used to connect pumps, tanks, IBCs to low pressure suction or discharge hoses. Hand pressure is enough to install the coupling without any tools required.

Cam arms, pins and rings are made of stainless steel 304 or 316. Standard gaskets are Buna-N, EPDM, PTFE, Nitrile and silicone sealing gaskets are also provided.

.