Technical Parameters of Electronics usage liquid silicone rubber
Features |
5035 A |
5035 B |
|
Before Curing |
Appearence |
Gray Fluid |
White Fluid |
Viscosisty(25°Ccps) |
65000±500 |
800±500 |
|
Operation features |
Mixing Ratio |
10:1 |
|
Viscosisty(after mixing) (cps) |
2000~3000 |
||
Operating Time(25°C hr) |
2 |
||
Curing time (min,25°C) |
48 |
||
Curing time(80°C hr) |
20 |
||
After Curing |
Hardness(Shore A) |
42±3 |
|
Thermal conductivity [W(m·K)] |
≥0.8 |
||
Dielectric Strength(KV/mm) |
≥25 |
||
Permittivity(1.2MHz) |
3.0~3.3 |
||
Volume Resisivity(Ω·cm) |
≥1.0×1016 |
||
linear expansibility [m/(m·K)] |
≤2.2×10-4 |
||
Fire Resistance |
94-V1 |
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference)
TECHNICAL GUIDELINES of Electronics usage liquid silicone rubber
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 10:1B
3, De-air in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4,Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.
Notes:
1.Pls use after the test. When necessary, pls clean the application areas.
2. LH 5035 A should seal storage. The mixture should be used up disposably to avoid causing waste.
3.LH 5035 A belongs to non-dangerous goods,
but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using, which does not affect the performance.
Electronics usage liquid silicone rubber silicone
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Please consult the supplier after Storage beyond the expired date
Company Information
Lianhuan silicone rubber Co. Ltd focuses on sourcing, quality control, arranging shipment and tracking customers orders continuously.
We produce many kinds of silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber
Our chemical products stable and No pollution. In a word, our silicone rubber products have the best stable quality and the best helpers.
We also produce silicone ink with non pollutes environment which heat resistance, recovery capacity, flexibility substitute the PVC ink people now use
Packing: 1KG/5KG/20kg/25kg/200kg per drum
Shipping: by air & by sea
Delivery time: within 3-5 days after your payment confirmed in our bank
Package & Delivery for sample
0.5KG free Samples
1. the international Freight fee is not included. Please contact with us to confirm the delivery fee by FEDEX/DHL/UPS/ to your address before placing order of sample
in general the sample can sent within 5 working days, the freight cost could be paid via ALIBABA PAYPAL and WESTERN UNION.
2. It is totally free if to use your own account of FEDEX/DHL/UPS
3.It’s totally free if to sent to a Chinese address.