We are looking for agents/wholesle all over the world ! We can provide the best quality production and price !!! We can make OEM Order !!!
1:BiaoYuan Tile Glue mainly used for cement-based wall and ceramic tile adhesion. Improve the flexibility and deformability of adhesive mortar
2,effectively reduce ceramic tile falls off and empty drum which caused by cement shrinking
3,enhance the adhesive performance of ceramic tile adhesive mortar after water resistant
4,this model applies ceramic tile adhesive mortar.
1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.
2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.
3. Has strong water retention, no need to dip tiles and wet walls, thin construction, easy operation, to reduce materialconsumption and building load.
4. Has good flexibility to resist effectively the destruction of various stresses.
5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.
6. It is no-toxic, no-radiation, no smell and environmental.
7. Has special formula to prevent the flow with too much southbound crash, easier construction.
A:Suitable for indoor wall ground paste all kinds of water absorption of ceramic tile, can be used for indoor damp environment for a long time.
B:For indoor walls paste all kinds of natural stone, white formula applies particularly to light natural stone Paste .
C:Suitable for indoor wall ground paste all kinds of ceramic glazed tile, particularly suitable for kitchen wall ground glazed pottery paste.
Advantage :
1:Mosaic gum paste and caulk the construction can be carried out simultaneously , easy to use and fast, and material, labor and time saving .
2:Compared with traditional mosaic glue cement paste paste method , bond stronger , Paste stronger and more secure.
3:Mosaic adhesive has a more favorable impermeability crack and anti-aging properties, can effectively reduce and prevent anti- efflorescence pulp , tears and other pollution linked to the phenomenon of tiles .
4:Colorful mosaic with glue , mildew , water and other excellent performance.
Surface preparation
1. All the surface should be strong/ dry/ clean, no shake/ oil stain/ wax stain/ concrete curing agent and other loose things.
2. If the surface is covered with paint, it should be hacked and at least exposed 80%.
3. New concrete surface should be cured for 28 days at least. Then pave tile.
4. New plaster base should be cured for 7 days at least. Then pave tile.
5. You can use industrial detergent or degreasing dirt agent to clean the old concrete or plaster surface. Then use high pressure tap to clean up. It can be paved tile after airing 24h.
6. Clean the residue of concrete surface, especially the residual mold release of the slant concrete surface.
7. Before construction, the surface need to be wetted, if the surface is water absorption strong or in high temperature/dry environment.
Technical parameters:
Adjust time (min) |
>5 |
Open time (min) |
≥10 |
Surface drying time |
approx. 2h |
Appearance |
White or grey powder |
Shrinkage % |
≤0.50 |
Normal shear strength |
≥1.0MPa |
Water resistance shear strength |
≥0.7MPa |
Heat treatment resistance shear strength |
≥0.7MPa |
Freezing-thawing resistance shear strength |
≥0.7MPa |