project | testing method | Performance standards |
Standard charging | 5V 2A charging, it will be full in about 12 hours | |
Initial capacity | After the standard charge is still for 1 hour, use 2A to discharge to 3.0V. | |
Cycle life | Charge at 0.5C until the current is less than 50-100mA, and then discharge at 0.5C to 3V. After 300 cycles, leave it for 1 day, and the power supply capacity is not less than 70%. | Cycle times ≥300 times |
(25℃) | ||
Static requirements | Contact discharge 8KV, air discharge 15KV. | Can charge and discharge normally |
structure | Product number |
C2006A |
Cell and combination method | Polymer battery 1260110/10000MAH 1S2P | |
Output Interface | TYPE-C/Female seat | |
Product Size |
146.6*70.6*27.5MM |
|
weight |
363g |