Best selling 60W Din Rail Switching power supply 5vdc 10A MDR-60-5 Ac to DC switching microwave power supply transformer
· Universal AC input/Full range
· LED indicator for power on
· Protections: Short circuit / Overload / Over voltage
· No load power consumption<0.75W
· Cooling by free air convection
· 100% full load burn-in test
· Can be installed on DIN rail TS-35/7.5 or 15
· 2 years warranty
· Built in DC OK active signal
|
Model |
MDR-60-5 |
MDR-60-12 |
MDR-60-24 |
MDR-60-48 |
|
|
|
DC voltage |
5V |
12V |
24V |
48V |
|
output |
Current range |
0~10A |
0~5A |
0~2.5A |
0~1.25A |
|
|
Rated power |
50W |
60W |
60W |
60W |
|
|
Ripple&noise |
80mvp-p |
120mvp-p |
150mvp-p |
200mvp-p |
|
|
DCvoltage ADJ.range |
±10% |
±10% |
±10% |
±10% |
|
|
Voltage range |
85~264VAC,120~370VDC 47-63Hz |
|||
|
|
Efficiency |
76% |
80% |
81% |
84% |
|
|
Inrush current |
Cold start current 30A/115VAC, 60A/230VAC |
|||
|
|
Over load |
105%~150% cut off the output,automatic recovery |
|||
|
|
Over voltage |
120%-140% shut down O/P voltage, re-power on to recover |
|||
|
environment |
Working temperature |
-10°C~+50°C |
|||
|
safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1minute |
|||
|
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC |
||||
|
others |
Dimension |
40*90*100mm (L*W*H) |
|||
|
Weight/packing |
0.33kg/60pcs/20kg/45.5*32.5*23cm |
||||
|
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
||||
|
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
|||||
|
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|||||
Q1.How we control the quality?
A1: Aging test for 8 hours, after then we put them into the market.
Q2. Can we accept samples customized?
A2: No problem for samples order, and welcome your testing before your big order.
Q3. What about the production capacity?
A3: 4 days for samples order under 100pcs, 7-15 days for general order under 10000pcs.
Q4. OEM and ODM are available?
A4: Yes, we accept customized products
Q5. Will the delivery time be long for a big order?
A5: No, we have two special parts in production line, one for samples orders, another for big orders, so we can control the delivery time as we promise in the contract.
Q6. What is our warranty service?
A6: For all products we sell have 2 year warranty.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier