TEREK pump adopt aluminum alloy and stainless steel materials ,Air boosters are suitable for the oil free compression of air, RTE Series are single acting and single stage driven type. This series of pump driven piston diameter is 160 mm.
TEREK pumps are air driven pressure from 3 to 8bar (43.5 to 116 psi) by the normal air compressor. Basically the theory of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated way valve. Its function is to increase the air pressure in the working system by 6 times.
It's such a device that uses compressed air as power source, air driven refrigerant pump as pressure source and refrigerant(cool medium) as working medium, to get the corresponding high pressure value through regulating air drive pressure; and the ratio of output pressure to air drive pressure is 6:1. When air drive pressure and outlet pressure reach balance, the refrigerant pump will stop pressurizing, and output pressure will be stable at the preset pressure, so it has such features: explosion-proof, output pressure adjustable, small volume, light weight, easy to operate, reliable performance, wide application range etc.
Safety—Pneumatically driven. Operates from air hose like an air tool. No electrical hazard.
1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2.No airline lubricator required
3. All components of the contact with the gas are made of aluminum or stainless steel
4.Wide range of models with different ratios
5. The air booster weighs about 30KG, which is easy to carry and can be configured according to the requirements.
6.Easy to install, operate and maintain
7. High quality seals, long life service available
8. Gas drive, No heat、flame or spark risk and explosion proof
9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
1. The pump is suitable for transferring R12,R22, R134a, R400,R407C, R410A,R500 etc refrigerant.
2. The pump can be also used for the recovery and perfusion of new type environment-friendly refrigerant, liquefied gas (CO2, SF6, Freon etc).
3. Pump configuration:
The refrigerant pump mainly consists of air drive chamber, pressurizing chamber, auto reversing valve, inlet check valve, outlet check valve, imported seal kits, air drive piston, pressurizing piston etc.
4. The device is used in the refrigeration industry to be used in the refrigerant central transport booster station for long-distance transportation.
5. The refrigerant filling quantity is more than 100kg of unit maintenance or production refueling.
6. Used for pressurization, filling and recovery of refrigerant.
Any more questions, please contact us, and welcome to add my skype or whatsapp for more details chat.