Wood Crusher equipment is the new-designed type,which can be used to cut the roun wood,wood logs, wood logs, big board and branches into wood chips. It can be droved by electric motor or diesel engine.The chips size can be adjusted according to specific demand.
The wood is fed into through feed port,when it touched to cut blade, along with the cutting knife plate of high-speed rotation to peel and cut, at last,these wood pieces are sent out through high speed steam-flow produced by fan blade in the knife plate.
Model |
Power (kw) |
Capacity (t/h) |
Inlet size cm |
Blade quantity |
Dimension(m) |
Weight |
NYX -420 |
7.5 / 11 |
0.3~0.8 |
15*15 cm |
3 pcs |
1.4*0.5*0.8 m |
350 kg |
NYX-600 |
15 /18.5 |
1~1.5 |
18*18 cm |
3 pcs |
1.5*0.6*1.1 m |
450kg |
NYX-700 |
22 |
1.5~2 |
20*20 cm |
3 pcs |
1.55*0.7*1.15 m |
560kg |
NYX-800 |
30 |
2~3 |
22*22 cm |
4 pcs |
1.90*0.8*1.3 m |
750kg |
NYX-950 |
37 |
4~6 |
25*25 cm |
4 pcs |
2.05*0.9*1.6 m |
850kg |
NYX-1150 |
55 / 75 |
6~8 |
33*33 cm |
4/6 pcs |
2.6*1.2*1.8 m |
1100 kg |
NYX-1410 |
90 / 110 |
10~15 |
40*40 cm |
4/6 pcs |
2.9*1.4*2.4 m |
1600 kg |
Wood Crusher
Q1. Why the sawdust pellets I made are mushy?
Qualified sawdust pellets should be hard and shiny. If your pellets are mushy, it probably is because your sawdust material is too wet. Try to dry it a little and try again.
Q2. Why My Pellets are Crumbly?
If the moisture content of sawdust is too low, the finial pellets will have crumbly problems.
Add some water into the sawdust with a spray bottle and mix evenly before feeding it into
the pellet making machine.
Q3. How should I know The Moisture Is Correct for Pelletizing?
When make pellets with a sawdust pellet mill for the first time, take one or two tries to get
a sense of the right amount of moisture required.