TEREK pump adopt aluminum alloy and stainless steel materials , We offer the most complete range of models in the industry measured Such as :Capability of ultimate pressure, flow or output horsepower. Compatibility with a broad variety of liquids ,such as oil ,water, corrosive liquid and chemical liquid applications. High quality seals, long service life available. LAH Series are single acting and triple driven head type. Compared with the single acting single driven head LKA series they reach triple pressure at the same air drive pressure. The diameter of drive plunger is 80mm
TEREK pumps are air driven at a drive air pressure of 2 to 8 bar (29 to 116 psi) by the normal air compressor. Basically the theory of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated way valve. Provide maximum operating pressure up to 4080bar.
TEREK pumps feature is a large air piston joint to a smaller diameter piston. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios. TEREK model reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.
The indicated flow maximum capacities is the maximum value which can be reached at an outlet pressure of 0 bar and an air drive of PL = 6 bar.
Max outlet pressure at an air drive of 8bar/116psi
In order to extend the lifetime of the booster pump, The driving air pressure should not be higher than 8bar.
1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2. High output pressure, No airline lubricator required
3. The pressure of the output liquid is easy to adjust, just adjust the input pressure.
4.Wide range of models with different ratios
5.Can be customized system in accordance with the standards of customer requirements
6.Easy to install, operate and maintenance.
7. High quality seals, long life service available
8. Gas drive, No heat、flame or spark risk and explosion proof
9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
10. All components of the contact with the gas are made of aluminum or stainless steel
1、Hydrostatic pressure tests and blasting test for valves, pipe and tubes, pressure vessels, pressure switches, tanks, hoses, pipes and tubing, pressure gauges, cylinders and etc.
2.Safety valve and water pressure testing.
3.Automobile brake system and nozzle test.
4.Injection of chemical reagents in a pipe or other instruments
5. Pressure testing of high pressure liquid systems and instruments.
6. Performance test and calibration of instrument and meter.
7.Mining, oil field and fire & safety Application of these field
8.Increase the strength of clamping, forming, drilling, cutting, stamping, etc.
9.Precision lubrication and spraying
10.Liquid transfer and liquid recovery
In order to choose the accurate and appropriate booster pump or systems for you,
Please kindly reply us the following questions:
1. What is the liquid you want to booster?
2.What is your Liquid ? Such as oil ,water, corrosive liquid and chemical liquid?
3. What outlet liquid pressure do you want?( )bar
4.What driven air pressure (of your air compressor) can you offer?( )bar,
because our booster is completely air operated and no need any electricity
5.What outlet liquid flow rate do you need?( )L/min
6. What is its purpose or application field you used it? Thanks