Best Seller Fast and Simple Hot Rolling Mill Jobs Photo
Skype evazhao06 Whats app 0086 15617575581
1.Brief introduction of hot rolling mill jobs photo
We could design and make hot rolling mill jobs photo as the followings:
Item | Project Name | Capacity |
1 | Rebar Steel Production Line | 30,000T-500,000T Per Year |
2 | Wire Rod Steel Production Line | 30,000T-300,000T Per Year |
3 | Angle Steel Production Line | 50,000T-200,000T Per Year |
4 | Steel Strips Production Line | 100,000T-500,000T Per Year |
Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 900-1050 degree centigrade), which is above the steel's recrystallization temperature. Hot rolled steel is used in situations where precise shapes and tolerances are not required.
Our factory could give you what you need to respond flexibly to market demands. What you can expect from our hot rolling mill jobs photo are high productivity and cost-effectiveness.
Depending on your final products and production volume, we develop custom solutions - wherever you are in the world. These range from complete new plants to modernizations and service schemes for existing equipment.
2.Details information of these four hot rolling mill jobs photo
(1)Production line of deformed rebar
Bar technological process: steel billets quality checking→reheating furnace → rolling mill→ fly shear for size→ cooling bed→ shear→ quality checking→ pack→ calculate→ put in storage
Billet quality determines the quality of finished products.
Purpose of billet heating:
The purpose of billet heating is to improve the plasticity of steel, reduce deformation resistance, so that it’s convenient to rolling; correct heating technological process can eliminate or lighten the defects in internal structure of billet.
For example: (rolling mill)
450×3/set |
Electricity motor: 1250kw |
6kv, AC |
400×2/set |
Electricity motor: 1000kw |
6kv, AC |
350×2×2/set |
Electricity motor: 800kw | 6kv, 630kw, 400v, AC |
300×2×8/set |
Electricity motor: 320kw, 8sets | 6kv, 630kw, 400v, AC |
(2)Production line of wire rod
Rolling process is the core of the whole steel rolling production technological process. We can make different wire rod size according to customer’s request.
For example:
450x3 rough rolling mill |
1set |
1250kw |
6kv |
AC |
400x2 rolling mill |
1set |
1000kw |
6kv |
AC |
350x2x2 rolling mill |
1set |
800kw |
6kv |
AC |
630kw |
400v |
AC |
||
300x2x8 rolling mill |
1set |
320kwx8sets |
400v |
DC |
(3)Production line of angle steel
We will follow customers’ dimensional requirements for angle steels, design related scheme.
The market is usually 50x50x5mm, 40x40x4mm and 30x30x2.5mm angle steel.
We will allocate the optimal hole pattern so that can reduce frequency of changing roller.
Finished angle steel will have even thickness, and stable quality.
(4)Production line of steel strips
The following is an example of a wide-band steel production line with a width of 500mm
Billet size: 480x130mm
Billet size: 480x140x6000mm |
Output requirement: 25t/h |
Thickness requirement: 1.5mm |
The required equipment is as follows |
1.Heating furnace |
2.750 three-roll rough rolling mill |
3.Roller bed |
4.Roller bed, 2-roll and 4-roll strip mill |
5.Scissors before and after machine |
6.Packing table |
7.Hydraulic, lubricating system, etc. |
8.For further details, please call 000000 |
3.The difference between hot rolling mill jobs photo and cold rolling
It's important to note that the main difference between hot rolled and cold rolled steel is one of process. “Hot rolling" refers to processing done with heat. "Cold rolling" refers to processes done at or near room temperature. It may seem obvious, but some types of steel are better suited for certain applications.
“Hot rolling” is the process of rolling the steel at a high temperature (usually over 935°C). These extreme temperatures are higher than the steel's recrystallisation temperature, meaning it can be shaped and formed more easily.
“Cold rolled steel” refers to the steel rolling process done at or near room temperature. Cold rolling involves the rolling of flat rolled coils and sheet products.
4.Other relevant equipments about hot rolling mill jobs photo
(1)The spectrometer instrument is calibrated with limited standard samples. For special alloy and special elements, the instrument must be calibrated by customer themselves. Or if customer is willing to provide sample collaboration for program development, the customer must provide accurate sample element content tables and ensure sample uniformity, but such curves are not used as acceptance indicators of the instrument.
(2)Model XK9350ZF-1 CNC roller crescent groove milling machine is a new type product that had been researched by our company, for metallurgy industry department in 1991, which is a special numerical control machine. It is especially suitable for milling roller crescent groove of metal, it is also suitable for the roller maintenance and production.
5.Our company information
Gongyi Hengyuan industry CO., LTD. is established in 2008, we are located in Gongyi, Henan Province, China. We are specialized in offering the followings items:
(1)Hot rolling mill jobs photo, we can offer whole project, such as factory design, rolling mill manufacturing, cooling bed, package system and so on;
(2)Spectrometers;
(3)CNC roller notching machine;
(4)Steel tensile testing machine.
Our goods sold to Malaysia, Vietnam, South Africa and so on. Our factory has rich experience and prior quality with reasonable price, and we really care about our every customer.
If you are interested in this hot rolling mill jobs photo, please contact with me freely as the followings: