SUJ1 SUJ2 SUJ3 material properties
1.Grade: GCr15 D502 E52100 E51100 E50100 SUJ1 SUJ2 SUJ3
2.Specification: 20-200mm
3. Supply condition: Hot-rolled steel, Annealed steel, Bright steel
4. Processing: Hot working
5.Detailed information:
Product Name | Product Series | Grade | Specification | Supply Conditions | Processing |
High-carbon Chromium Bearing steel | Cr | GCr15 | 30-95 | Hot-rolled round steel
Annealed Round steel
Bright Round steel | Hot working |
Carburizing Bearing steel | Si-Mo-V | D502 | 30-140 |
China GB YB | Japan JIS | Germany VDEh | USA ASTM SAE AISI | UK BS | France NF |
GCr6 |
| 105Cr2 | E50100 |
| 100C3 |
GCR9 | SUJ1 | 105Cr4 | E51100 | 534A99 | 100C5 |
GCr15 | SUJ2 | 100Cr6 | E52100 | 534A99 | 100C6 |
GCr9SiMn | SUJ3 |
|
|
|
|
GCr15SiMN |
| 100CrMn6 |
|
|
|
6. Chemical composition:
Steel Grade | C | Si | Mn | P | S | Cr |
E52100 | 0.95 1.10 | 0.15 0.35 | 0.25 0.45 | Max. 0.025 | Max. 0.025 | 1.30 1.60 |
GCr15 | 0.95 1.05 | 0.15 0.35 | 0.20 0.40 | Max. 0.027 | Max. 0.020 | 1.30 1.65 |
Packaging:
1): Paint oil on the surface to protect steel bars from rusting.
2): Bundle packing by Iron Strips.
3): Bundle weight is from 2mt to 3 mt.
4): Two or three tags will be attached on each bundle. In general, at one end of each bar, tags will be attached, containing the followings: Description of Goods, Heat No., Steel Grade, Size, NR, WT, Date and Origin.
Of course, all depends on customers’ requirements.
Both end of each bar must be cut.
Must be ladle furmanced and vacuum de-gassed.
Must show heat number on each bar.
Surface condition:The surface of the hot rolles square/round bar shall be free cracks,scar and wrinkles that affect the use of the products. In case there is the above-mentioned defect,it shall be removed.
The mill test certificate shall show the chemical composition,and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract.
Our company was established in April 2009, specializing in domestic and international steel trade technical services.In March 2016, the production line of cold-drawing, annealing, normalizing, tempering treatment and finishing lines such as peeling, fine grinding and chamfering were built, equipped with complete experimental equipment and testing equipment to ensure stable product quality.Make use of our strong production capacity, constantly meet the personalized and professional requirements of customers.
Factory view turning-lathe
QT cold drawing
polishing peeling
Our products are sold to Europe, America, Middle East, Southeast Asia and other countries, all over the world.
4140 steel bar is mainly used to produce high strength stud bolt, threaded rods, wind power bolt, pre-stressed anchor bolts, post stressed anchor bolt, steel tie rod, tie bar, tension rod, tension bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods.
As a Chinese steel bar professional manufacturer and supplier of more than twenty years, with complete produce and processing facilities, advanced testing equipments and big stock of steel bar, we can supply 4140 steel bar with good quality, competitive price, short delivery time and personalized customization. We welcome old and new customers to inquire to us for technical questions and demands.