Battery Application Carbon Graphite Electrode Anode Plate
Advantages;
1. high strength,high hardness
2. good heat-resistance, low porosity
3. anti-abrasion,anti-scour
4. antioxidation,non-infiltration
5. large sizes and thin thickness
6. high temperature resistance
7. High mechanical strength
8. Oxidization retardent treatment
9. Long service life
Physical and chemical indicators of graphite plate:
NO. | Density | Compressive | Flexural | Resistivity | Ash | Particle size |
g/cm3 | MPa | MPa | μΩm | % | mm | |
≥ | ≥ | ≥ | ≤ | ≤ | ||
TH172 | 1.72 | 48 | 26 | 7 | 0.3 | 2mm |
TH180 | 1.80 | 52 | 30 | 6 | 0.3 | 325mesh |
TH210 | 2.1 | 120 | 60 | 13 | 0.3 | 325mesh |
Application
1. Refractory material: widely used in the metallurgical industry. Battery and Fuel Cell. For Battery, could machine groove and hole on the plate.
2. Conducting material: In the electronics industry, widely used for graphite electrode, brush,, etc
3. Wear-resisting material and lubricant: Use graphite as wear-resisting and lubrication materials, can be 100m/s speed sliding in - 200 ~ 2000 °C temperature range , no or less lubricanting oil.
4. Sealing material: it can be as sealing ring in the equipment, such as centrifugal pump, hydraulic turbine ,etc.
5. Anticorrosion material: Widely used in petroleum, chemical, hydrometallurgy departments.
6. Insulation, high temperature resistant, radiation protection materials
7.Molds: hot pressing molds, static casting molds, centrifugal casting molds, pressure casting molds, fused refractory molds, etc.
8. Furnace parts: resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc.
9. Anodes for the electrolysis of metals. As graphite elecerode plate and graphite anode plate .
10.Parts for heat exchangers.
11. Mahince to Crucibles for melting and reduction. Boats and trays for sintering.
If you want to know more about us,please click here to our main page.