Bakelite Thermostat Suppliers Termostatos Bimetalicos 45 75 Snap Circuit High Quality
Bakelite Thermostat Suppliers Termostatos Bimetalicos 45 75 Snap Circuit High Quality
KSD301-V series snap-action thermostat is a kind of miniature hermetically sealed bimetal thermal switch (1/2" disc). It is of single-pole single-throw structure and works under resistive load. KSD301 thermostat is in wide use in a great variety of compact type home appliances, such as coffee maker, water dispenser, toaster, microwave oven, electric pad and portable icebox etc., to provide temperature control or temperature protection.
Advantages:
- Easy mounting.
- Rapid heat transmission.
- High durability.
- No breakdown, no flashover.
- Every product will be tested, extremely high temperature pass rate.
- High precision.
Parameter:
|
Use |
Temperature control/Overheat protection |
|
Appliance |
Coffee maker/ Drinking machine/toaster/Microwave oven/ Heating/ Portable Refrigerator/etc |
|
Reset type |
Automatic |
|
Base material |
ceramic base |
|
Amperage |
5A/10A/16A |
|
Max. Operating Temperature |
220°C |
|
Differential |
Refer to the regulation |
|
Tolerance |
Refer to the regulation |
|
Protection class |
IP00 |
|
Contact material |
Silver/Gold |
|
Dielectric Strength |
Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover. |
|
Insulation Resistance |
With a DC 500V megger, borne DC 500V, the tested value is over 10MW. |
|
Resistance Between Terminals |
Below 50mW |
|
Temp. characteristics: |
Normal type: OFF temperature higher than ON temperature.(Normal close) K type: ON temperature higher than OFF temperature.(Normal open) One-shot type: The thermostat switches on at room temperature and it won't be able to reset after switching off. |
|
Maximum ambient temperature |
280°C(Long period)
|
|
Diameter of bimetal disc |
F12.8mm(1/2″) |
|
Approvals |
CQC/TUV |
|
Terminal type |
Customized (Refer to our specification) |
|
Cover/Bracket |
Customized (Refer to our specification) |
Dimension of the main body:
Safety certificate:
|
Max. OT |
Life |
120V 7A 240V 5A |
250V 5A |
250V 10A |
125V 16A |
250V 16A |
|
145°C |
60,000 |
|
CQC,TUV |
|
|
CQC,TUV |
|
150°C |
100,000 |
sec. 2 |
|
|
|
|
|
180°C |
100,000 |
|
|
CQC,TÜV, sec. 2 |
sec. 2 |
Installation and Direction for Use:
- Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.
- The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.
- When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover's surface.
- If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat's insulation parts.
- The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat's temperature sensitivity or its other functions.
- Liquids must be kept out of the thermostat's inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.
- The terminals should be bent, or else, the reliability of electric connection will be influenced.
Getting more information, please refer to our website:
www.thermostat-gb.com
Products recommendation :
AWE 2018 - Appliance & Electronics World Expo 2018
Getting more information about high temperature protector and limit switch, please refer to our website: www.thermostat-gb.com
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier