Name | Ceramic band heater |
Voltage | 440V |
Power | 1500W |
Diameter | 110 mm |
Height | 170 mm |
Ambient Temperature | -20℃~+80℃ |
Elctrical Strength | Pass voltage 1500V/50HZ sinusoidal withstand test. lasted 1MM no breakdown phenomenon. |
Leakage Current | <5MA |
Cold Insulation resistance | <5Ω |
Temperature Level | Installed on the machine surface temperature up to 1200℃ without burning phenomenon. |
Input power | Customized, power deviation is +5%-10% |
Sheath Material | Stainless Steel cover for ceramic band heater |
Connection Method | 1.Metal box 2.Screw post terminals 3. High Temperature Plug 4.High temperature cable/ 5.Ceramic block |
Nominal Wall Thickness | Premium Heat : ½" Power Saver : ½" + 5/8" (Outer Insulation) Power Saver PLUS :½" + 1.5" ( Outer Insulation) |
Heating Elements (coil) | Cr20Ni80 |
Lead Wire Terminals | 1.Stainless steel braid: stright lead exit/ low profile terminal cover/ used mostly with nozzle heaters/ 180° from gap/ heat shrink sleeving 2.Plain lead wire: straight lead exit/ exiting both sides of the gap/ used 3.mostly with nozzle heaters/ 180° from gap 4.PTFE insulated wire 5.Fiberglass insulation wire |