Material | Cotton Linters |
Usage/Application | CJC Oil Filtration Unit |
Brand | CJC |
Dirt Holding Capacity | 5.5KG |
Part Number | PA5601325 |
Height | 27 cm |
BLAT 27/27 Filter Insert is manufactured especially for CJC Filter Separators for filtration and water separation of mineral-based oils of up to ISO VG 150 cSt and are typically used for hydraulic oils, turbine lubricating oils, gear oils, diesel oils. Particle removal: All CJC Filter Inserts have an oil filtration degree of 3 m (micron) absolute. This means that 98.7% of all solid particles larger than 3 m and approximately 50% of all particles larger than 0.8 ??m are retained in one pass. The dirt-holding capacity of a BLAT 27/27 Insert is 4.0 litres of evenly distributed solids. Degradation products: Oxidation by-products, resin / sludge, and varnish are retained by the cellulose material. The cellulose will retain appr. 4 kg of degradation products. Water removal: Unlike B Filter Inserts, the BLAT 27/27 will not permanently hold water as its free passage is integral to the water separation process.
Please click on the picture for more products
Warranty :
Defects in material and workmanship for 2 years from time of installation.
Will last one (1) year of continuous service (8000 hours).
Filter must result in no power loss due to compressor fouling or filter dP increase over 8000 hours of operation.
1.Are you a trading company or manufacturer?
We are professional manufacturer with factory in China, since 1988.
2.What kinds of filter do you produce?
It covers widely for air filter,oil filter,fuel filter for trucks, construction machinery, power plant equipment,compressor-turbine unit etc.
3.Is Customized filter available?
Yes,please offer your required specifications and drawing
4.Can I get you products with our logo and design?
Yes, you can. Most of our products can be customized according to your requirements.
5.How can we get the quotation of filter cartridges ?
Please let us know the specifications, such as the materials, length, macron, apply in which industry etc.
6.Do you Accept OEM service?
YES!
7. Would it be possible for us to visit you factory?
Sure we are very welcome you at any time!
8.What's your delivery terms?
(1)FOB (2)CFR (3)CIF
9.What's your Delivery Time?
1)generally the samples will be sent immediately by the air express in 3-5 days if the goods are in stock
2)Normally within 15 to 30 days,please confirm with us before order!
10.What's the Payment Terms?
Usually,30% as deposit,70% before shipment by T/T
Western Union acceptable for small amount.
L/C acceptable for large amount.
Escrow, Paybal, Alipay Credit card are also available
11.How to solve the quality problem?
If the products are not comfort to customer sample or have quality problems, our company will be responsible to make a composition for it.
12.How you pack products?
Normally, poly bag inside and carton outside .We'll do according to customers' requirement.
13.What's your available port of Shipment?
Normally, Shanghai and Tianjin
Other ports available but you should afford extra charges.