BERGQUIST Sil-Pad 1100ST 1500ST Economical, Electrically Insulating, Thermally Conductive, Soft Tack Elastomeric Material
BERGQUIST Sil-Pad 1100ST 1500ST Economical, Electrically Insulating, Thermally Conductive, Soft Tack Elastomeric Material
Sil-Pad 1100ST (Soft Tack) is a fiberglass-reinforced thermal interface material featuring inherent tack on both sides. The material exhibits excellent thermal performance at low mounting pressures. The material is supplied on two liners for exceptionally easy handling prior to auto-placement in high-volume assemblies. The material is ideal for placement between an electronic power device and its heat sink.
Sil-Pad 1500ST Featuress ~ Thermal Materials, Thermal Solutions ~ Henkel
Bergquist Sil-Pad 1500ST (Soft Tack) is a fiberglass reinforced thermal interface material that is naturally tacky on both sides. Sil-Pad 1500ST exhibits superior thermal performance when compared to the competitors' thermal interface materials. Sil-Pad 1500ST is supplied in sheet form or roll form for exceptional auto-dispensing and auto-placement in high volume assemblies. Sil-Pad 1500ST is intended for placement between an electronic power device and its heat sink.
Feature:
- Inherent tack on both sides for exceptional thermal performance and easy placement
- Re-positionable for higher utilization, ease of use and assembly error reduction
- Lined on both sides for ease of handling prior to placement in high volume assemblies
- Exhibits exceptional thermal performance even at a low mounting pressure
- Fiberglass reinforced
- Value alternative to Sil-Pad 1500ST
Properties:
|
Typical Properties of Sil-Pad 1100ST
|
|||
| Property |
Imperial Value
|
Metric Value
|
Test Method
|
| Color |
Yellow
|
Yellow
|
Visual
|
| Reinforcement Carrier |
Fiberglass
|
Fiberglass
|
***
|
| Thickness (inch) / (mm) |
0.012
|
0.305
|
ASTM D374
|
| Inherent Surface Tack (1 or 2 sided) |
2
|
2
|
***
|
| Hardness Bulk Rubber (Shore 00) (1) |
85
|
85
|
ASTM D2240
|
| Breaking Strength (lbs/inch) / (kN/m) |
2.6
|
0.5
|
ASTM D1458
|
| Elongation (% - 45° to Warp and Fill) |
16
|
16
|
ASTM D412
|
| Tensile Strength (psi) / (MPa) |
220
|
1.5
|
ASTM D412
|
| Continuous Use Temp (°F) / (°C) |
-76 to 356
|
-60 to 180
|
***
|
| Electrical
|
|||
| Dielectric Breakdown Voltage (Vac) |
5000
|
5000
|
ASTM D149
|
| Dielectric Constant (1000 Hz) |
5.0
|
5.0
|
ASTM D150
|
| Volume Resistivity (Ohm-meter) |
1010
|
1010
|
ASTM D257
|
| Flame Rating |
V-O
|
V-O
|
U.L. 94
|
| Thermal
|
|||
| Thermal Conductivity (W/m-K) |
1.1
|
1.1
|
ASTM D5470
|
|
Typical Properties of Sil-Pad 1500ST
|
|||
| Property |
Imperial Value
|
Metric Value
|
Test Method
|
| Color |
Blue
|
Blue
|
Visual
|
| Reinforcement Carrier |
Fiberglass
|
Fiberglass
|
***
|
| Thickness (inch) / (mm) |
0.008
|
0.203
|
ASTM D374
|
| Hardness (Shore 00) |
75
|
75
|
ASTM D2240
|
| Breaking Strength (lbs/inch) / (kN/m) |
1.9
|
0.34
|
ASTM D1458
|
| Elongation (% - 45° to Warp and Fill) |
22
|
22
|
ASTM D412
|
| Tensile Strength (psi) / (MPa) |
238
|
1.6
|
ASTM D412
|
| Continuous Use Temp (°F) / (°C) |
-76 to 356
|
-60 to 180
|
***
|
| Electrical
|
|||
| Dielectric Breakdown Voltage (Vac) |
3000
|
3000
|
ASTM D149
|
| Dielectric Constant (1000 Hz) |
6.1
|
6.1
|
ASTM D150
|
| Volume Resistivity (Ohm-meter) |
1011
|
1011
|
ASTM D257
|
| Flame Rating |
V-O
|
V-O
|
U.L. 94
|
| Thermal
|
|||
| Thermal Conductivity (W/m-K) |
1.8
|
1.8
|
ASTM D5470
|
Applications:
- Automotive ECMs
- Power supplies
- Motor controls
- Between an electronic power device and its heat sink
Our Factory Competitive Advantages:
• Well Competitive Prices and High Quality Control
• Prompt Delivery
• Earth-friendly Products
• In a Variety of Design
• Small Order Acceptable
• OEM Accepted
1)How to order from xinst?
Just send us email or call us.
2)Do you offer the free sample for testing?
Yes, we offer the sample free, but you courier charges.
3)How to ship the order?
We will suggest you the appropriate way of shipment, by sea, by air or by courier. Of course if you will have your own forwarder, that is no problem.
4)Can we trust the quality of product from Xinst?
Sure, do not worry about that. Our quality wills absolutely compliance to the sample we send. If not, we will take charge of that.
5)What payment Xinst accepts?
For the small quantity, we request 100% advanced TT payment; other conditions, negotiable. Sorry, we did not accept the Credit card for the time being.
6)How about the lead time of per order?
If the tape you order have stock, we can ship out within 1~3 days. If there is no stock, you need to wait about 5~12 days. If you are request the die-cuts, the time shall longer.
Friendly Tips:
If you find our tapes interested, please send your detailed requirements to us. Xinst’s team would offer different solutions to you within 12 hours. Free samples are also available.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier