Bond-Ply 660P is a thermally conductive, electrically insulating, double sided pressure sensitive adhesive tape.The tape consists of a high performance, thermally conductive acrylic adhesive coated on both sides of a Polyimide film. Use Bond-Ply 660P in applications to replace mechanical fasteners or screws.
Bond-Ply 800 Features Thermal Materials, Thermal Solutions ~ Henkel
Bond-Ply 800 is a thermally conductive, electrically isolation double-sided tape. Bond-Ply 800 is utilized in lighting applications that require thermal transfer and electric isolation. High bond strengths obtained at ambient temperature lead to significant processing cost savings in labor, materials and throughput due to the elimination of mechanical fasteners and high temperature curing.
Feature:
Properties:
Typical Properties of Bond-Ply 660P | |||
Property | Imperial Value | Metric Value | Test Method |
Color | Light Brown | Light Brown | Visual |
Reinforcement Carrier | Polyimide Film | Polyimide Film | *** |
Thickness (inch) / (mm) | 0.008 | 0.203 | ASTM D374 |
Glass Transition (ºF) / (ºC) | -22 | -30 | ASTM 1356 |
Continuous Use Temp (ºF) / (ºC) | -22 to 248 | -30 to 120 | *** |
Adhesion | |||
Lap Shear @ RT (psi) / (MPa) | 100 | 0.7 | ASTM D1002 |
Lap Shear after 5 hr @ 100ºC | 200 | 1.4 | ASTM D1002 |
Lap Shear after 2 min. @ 200ºC | 200 | 1.4 | ASTM D1002 |
Electrical | Value | Test Method | |
Dielectric Breakdown Voltage (Vac) | 6000 | ASTM D149 | |
Flame Rating | V-O | U.L. 94 | |
Thermal | |||
Post-Cured Thermal Conductivity (W/m-K) | 0.4 | ASTM D5470 |
Typical Properties of Bond-Ply 800 | |||
Property | Imperial Value | Metric Value | Test Method |
Color | Gray | Gray | Visual |
Reinforcement Carrier | Fiberglass | Fiberglass | *** |
Thickness (inch) / (mm) | 0.005, 0.008 | 0.127, 0.203 | ASTM D374 |
Elongation (%, 45° to Warp & Fill) | 70 | 70 | ASTM D412 |
Tensile Strength (psi) / (MPa) | 1500 | 10 | ASTM D412 |
CTE (μm/m-°C), -40°C to +125°C | 600 | 600 | ASTM D3386 |
Continuous Use Temp (°F) / (°C) | -40 to 257 | -40 to 125 | *** |
Adhesion | |||
Lap Shear @ RT (psi) / (MPa) (1) | 150 | 1.0 | ASTM D1002 |
Electrical | Value | Test Method | |
Dielectric Breakdown Voltage (Vac), 0.005 | 4000 | ASTM D149 | |
Dielectric Breadkown Voltage (Vac), 0.008 | 6000 | ASTM D149 | |
Dielectric Constant (1000 Hz) | 4.0 | ASTM D150 | |
Volume Resistivity (Ohm-meter) | 1011 | ASTM D257 | |
Flame Rating | V-O | U.L. 94 | |
Thermal | |||
Thermal Conductivity (W/m-K) | 0.8 | ASTM D5470 |
Our Factory Competitive Advantages:
• Well Competitive Prices and High Quality Control
• Prompt Delivery
• Earth-friendly Products
• In a Variety of Design
• Small Order Acceptable
• OEM Accepted
1)How to order from xinst?
Just send us email or call us.
2)Do you offer the free sample for testing?
Yes, we offer the sample free, but you courier charges.
3)How to ship the order?
We will suggest you the appropriate way of shipment, by sea, by air or by courier. Of course if you will have your own forwarder, that is no problem.
4)Can we trust the quality of product from Xinst?
Sure, do not worry about that. Our quality wills absolutely compliance to the sample we send. If not, we will take charge of that.
5)What payment Xinst accepts?
For the small quantity, we request 100% advanced TT payment; other conditions, negotiable. Sorry, we did not accept the Credit card for the time being.
6)How about the lead time of per order?
If the tape you order have stock, we can ship out within 1~3 days. If there is no stock, you need to wait about 5~12 days. If you are request the die-cuts, the time shall longer.
Friendly Tips:
If you find our tapes interested, please send your detailed requirements to us. Xinst’s team would offer different solutions to you within 12 hours. Free samples are also available.