BDW Bidragon biomass fired boiler manufacturer China

1. Name

Bidragon BDW Biomass Fired Boiler China

2. Brief Introduction of Pellet Fired Boiler 

• High efficient and energy-saving: Our biomass boilers using gasification ways to have complete combustion, boiler heating up rapidly, the thermal efficiency can reach more than 90%; the furnace body with a multi-return structure maximally increase the heat transfer area, so the heat can be completely conversion; configured a dedicated afterheat recovery unit, greatly reducing the cost of burning because of the exhaust low pipe temperature.

• Environmental protection: to promote environmental protection the fuel of this kind boiler are biomass fuels, affordable, worry-free about wide variety of sources; special gasification chamber can make the fuel material into half-full gasification combustion, no need to set up the tall chimney, only connect the boiler air-outlet to outdoor; and configured the special dust removal device, no visible smoke emissions.

• Intelligent control: we adopt microcomputer one-button operation, automatic feed automatic ignition, with the setting temperature, start and stop cycle, and fault alarm function, simple and easy operation.
  

• Safe and labor save: our biomass boiler is a non-pressure boiler which need not the professional fireman. Automatic feed automatic ignition, only feeding 1-2 times per day, the configuration of the drawer type hopper, easy and simple cleanup, greatly reduce labor intensity.
  

• Powerful function: in the case of the furnace’s preheating completes , can get hot water within 1-2 minutes; we set a unique heat exchanger structure in the furnace body, so there is no need to outlay external heat exchanger, heating and hot water two functions can work simultaneously without disturbing each other.

Technical Parameter:

3. Why will you choose us :

• The wiring would be on plug in connectors on the cabinet.

• The 3 phase fans are earthed.

• The feeder bin is made from slightly heavier material.

•  Painted surfaces [bin and boiler base] have good quality paint.

• Bolts for assembly are zinc plated or perhaps stainless steel as customer request.

• The flanges for mounting the sight glass are protected or fitted somewhere that they can’t get damaged.

• The size of the hole in the grate will be smaller as the fuel request (The smallest diameter of pellet we designed is 8mm).

4. Customer just should do:

• Plug in power supply.

• Connect with water inlet

• Connect with water outlet with pump or other heat consumption equipments.

• Connect with expansion tank.

• Connect with chimney

• Put fuel to hopper

• Push button to start boiler

 5. Application Scope

       This boiler is widely applied in family, private villas, apartments, hotel, mansion, schools and other places which need hot water, bath and heating.

6.   Fuel Material Requirements

      Wood pellets, straw pellets, peanut shell pellets, cotton stalk pellets, bean stalk pellets with diameter between 6-10mm, palm shell, wood chip and waste wood.