Automotive Chrome Surface Open End Wheel Center Cap
Automotive Chrome Surface Open End wheel Center Cove
- Designed to enhance the appearance of the vehicle's wheels
- Features a heavy chrome plating
- Offers long lasting durability
- Corrosion resistant
- Facilitates hassle-free installation
1.Jack up the vehicle. While some wheel covers can be installed without removing lug nuts, you may often find that the lug nuts on your wheel are intended to help hold the wheel cover in place. If need to remove the lug nuts on the wheel, first loosen the lug nuts, then jack the car up.
Always jack your vehicle up on solid, level surfaces like blacktop or concrete.
Place jack stands beneath the vehicle once you jack it up for safety.
2.Remove the lug nuts. Use a tire iron or socket wrench to completely unscrew the lug nuts holding the wheel onto your vehicle. Set the lug nuts aside for you to use when mounting the wheel back onto the vehicle.
Turn the lug nuts counter-clockwise to unscrew them.
Be careful not to misplace any lug nuts. It is not safe to drive your vehicle with fewer than the provided amount of lug nuts.
3.Line up the ring indent with the valve stem. The retention ring on the back of the wheel cover will have an indentation in it, as well as a hole through the wheel cover in the same area. This gap is intended to allow the valve stem to pass through the cover for you to access when adding air to your tires.
Be sure to align the gap in the cover and retention ring with the valve stem so it can pass through.
Many wheel covers will have a drawing of a valve stem on the back intended to help you identify where the valve stem passes through.
4.Press the wheel cover directly onto the wheel. With the valve stem properly aligned through the wheel cover, press the wheel cover directly onto the wheel. If you did not need to remove your lug nuts, the wheel cover should pop into place and not come back off the wheel easily.
If you do not need to use lug nuts to secure the wheel cover, pull on it a bit to ensure it will not come off while driving.
The wheel cover should not feel loose, nor should it be easily pulled off.
5.Screw on the lug nuts. If you removed the lug nuts previously, use your hands to thread each nut onto a lug stud passing through the wheel and wheel cover. Once you are confident the lug nuts are properly threaded, use a wrench or tire iron to tighten them.
Be sure to re-tighten the lug nuts once you lower the vehicle down off of the jack.
Be sure all lug nuts are tight before attempting to drive the vehicle.
100PCS/CTN, G.W./N.W.: 16/15KG,MEAS: 60X60X24CM
Yuyao BeiShuo Hardware Co., Ltd. is specialized in wheel lug nuts, wheel lug bolts, wheel locks, wheel adapter, wheel spacer, hub centre ring, socket spanner, pressing and plastic products. Our products are in complete range of articles , and offered at reasonable price.
BEISHUO adheres to quality first, stresses on quality management, and adhere to people oriented policy and continued innovation. BEISHUO strictly carries out ISO9001: 2000 quality management standard and keeps developing new products to satisfy market demands. The products are exported to Europe, US, Middle East and other countries and regions, and deeply favored by domestic and foreign clients.
We Operate under the principle of “Better quality, Better price and Better cooperation”. BEISHUO wholeheartedly welcome honored guests both at home and board to business negotiation.
1.Exhibition Name: Shanghai Intel’ Hardware Show
Address: National Exhibition and Convention Center (Shanghai)
Exhibits: Tools, Building Hardware, Fastener, Locks, Security Equipment and Accessories.
Booth No.: 7C034
Date: 21th-23th,Oct
2.Exhibition Name: AUTOMECHANIKA MOSCOW
Address: Moscow International Exhibition Center
Booth No.: 7.4#428
Date: 28th-30th,Oct
3.Exhibition Name: MOSCOW INTERNATIONAL TOOL EXPO(MITEX)
Address: Moscow International Exhibition Center
Booth No.: 2.1A22
Date: 10th-13th,Nov
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier