Automobile Engine Dry Ice Cleaning Machine, Dry Ice Machines for Cleaning Engine Carbon Deposition
Similar to steel blast, glass blast, plastic blast, and soda blast, dry ice is sprayed with a medium in which dry ice particles are accelerated in a high pressure airflow, impacting the surface to be cleaned. Dry ice cleaning is unique in that the dry ice particles vaporize on impact. The momentum of the dry ice particles disappears at the moment of impact. Rapid heat exchange occurs between dry ice particles and the cleaned surface. The result is a rapid sublimation of solid CO2 into a gas. Dry ice particles expand nearly 800 times in volume in a few thousandths of a second, creating a "mini explosion" at the impact point. Dry ice cleaning is widely used in rubber, casting, automobile, shipping, electric power, chemical, printing, paper, plastic, CH- CH 6 ice cleaning process does not produce any secondary waste, leaving only the removed dirt to be collected and cleaned. After the dirt is stripped off, it is taken away by the air flow to achieve the purpose of cleaning.
Parameters:
Rated Voltage |
220 VAC, 50 Hz,3A |
Rated Power |
375W |
Equipment Dimension |
500x400x980mm |
Dry Ice Capacity |
7.5kg |
Dry Ice Type |
3mm Particle |
Dry Ice Flow |
0~5.2kg/min |
Working Pressure |
6-10bar |
Compressed Air Consumption | 3m³/min |
Configurations:
Dry Ice Machines for Cleaning Engine Carbon Deposition* 1 set
Accessory 1: Dry ice spray gun (including relevant power control line) * 1 pcs
Accessory 2: Intake pipe (6m in length, diameter 6min) * 1pcs
Accessory 3: Dry ice jet pipe (6m in length, 4 points in diameter) * 1 pcs
Accessory 4: Special spray gun for automobile * 6 pcs
Accessory 5: Ground wire, protective mask and earmuff * 1 set
URL: www.dl-industry.net
Tel/Fax: +86 0510-82859636
WhatsApp/M: +86 18012391615