Automatic welded steel making crimped cutting panel knitting fully automatic BRC wire mesh welding machine
1.This machine can make both of panel mesh and roll mesh
2.Line wires are fed from wire coils automatically and through straightening rollers
3.Cross wire should be pre-cut and fed by cross wire feeder automatically
4.Equipped with cutting machine to make panel mesh and rolling machine to make roll mesh
Model | DP-FP-2500BN | |
Wire diameter | 2.5-6 mm | |
Line wire space | 50-300mm | |
Cross wire space | Min.50mm | |
Mesh width/height | Max.2.5m | |
Mesh length | Max.100m | |
Welding electrodes | 48 pcs | |
Welding speed | 50-75 times/min | |
Welding transformers | 150kva*6pcs | |
Line wire feeding | From wire coils | |
Cross wire feeding | Pre-cut | |
Overall Size | 5.4*3.2*1.7m | |
Weight | 5500kg |
Welding electrodes- chromium zirconium copper
Upper-20mm diameter Lower-20*20*20mm, can be used 6 sides, The welding electrode distance can be adjusted. |
|
Main motor (5.5kw)& planetary reducer connect the main axis directly, instead of by chain. It is not easily broken. High stability. Big transmission torque, suitable for high welding speed. |
|
Cast water-cooling welding transformers Suitable for high temperatures. When 2.5-4mm one welding transformer controls 8 welding electrodes. When 4-6mm, one welding transformer controls 4 welding electrodes. |
|
Panasonic brand servo motor (2kw) for mesh pulling, accurate, big power. SMC air cylinders controls the hook up&down. J&T brand pulling rack, less noise, high accuracy |
Q: What's the machine price?
A: We need to know the mesh hole size and mesh width you want.
Q: Can you make the machine according to my voltage?
A: Yes, usually the popular voltages are 3 phase, 380V/220V/415V/440V, 50Hz or 60Hz etc.
Q: Is there any cooling system on your machine?
A: We use water cooling welding transformers on the machine.
Q: How many containers are needed to load one machine?
A: One 40 feet container is just enough.
Q: Is the mesh size adjustable?
A: Yes. The mesh size can be adjusted randomly within range.
Q: Can I adjust the welding degree?
A: Yes, you can adjust the welding current and welding time. It is controlled by PLC.
Q: What's the production capacity of this machine?
A: If 150*150mm mesh size, 25m mesh length, about 3.5 minutes the machine can weld 1 mesh roll.
Q: What’s the power supply needed for this machine, does it need air power?
A: The power supply should be min.160kva. Air compressor 0.3m^3.