Automatic spray paint machine or Manual spraying 's Dry-typed spray paint booths for sale
Production Features:
Environmental protection type water curtain ark (spray paint stage) basically be to pump water to go up to water curtain board to flow down equably by self-priming pump, the waste gas that spray gun gush comes out (lacquer mist) by the water on water curtain board hits in the pool below.A small part of the exhaust gas (paint fog) is above the fan through the exhaust pipe exhaust outside the workshop.There is no waste gas (paint fog) in the workshop to give everyone a good working environment.
Use and performance
Mainly used for product spray paint workshop exhaust (paint fog) treatment, to give everyone a good working environment.High efficiency environmental protection water curtain cabinet (spray paint station) mainly USES the water to filter the exhaust gas of the spray paint workshop (paint fog) to use conveniently and save energy.Pass water to hit exhaust gas (lacquer) drain inside, change water regularly
Parameter List
No. |
Item |
Specification |
|
1 |
Size |
W2300mm(inner width)x D2000mm x H2500mm |
|
2 |
|
Tank
|
The tank is welded by 1.5mm 202# stainless plate, Full welding. |
The foot stool for tank |
It is made of welding 50x50 stainless steel square box section. The M14 adjustable foot cup is equipped in the bottom of foot stool. |
||
The top and side plate |
It is made by bending and welding 1.2mm 202# stainless steel sheets. They are connected by the stainless steel screw and the gap is filled by the glass cement. |
||
The rear of the plate |
It is made by bending and welding 1.2mm 202# stainless steel sheets. |
||
3 |
Filter |
Paint Filter Paper |
Use L2300X W800X H60mm filter paper 2pcs. |
4 |
exhaust gas system |
Wind turbines |
It use 1 set of 3P special centrifugal fan for water booth. The air volume is 8500 cubic meters per hours.(not included) |
Air Pipe |
The air pipe is not included. |
||
5 |
electrical equipment |
Electric Control Cabinet |
A set of Electricity box, not including the frequency transformer, The accessory use the China CHINT brand which is famous in our country. |
Lighting |
The light use 1 pc 40W explosive-proof light with cover. |
Product Show:
Application:
The paint booth has water curtain spray paint booth and the Dry-typed spray paint booth, it suit for the manual spraying and the automatic spray paint machine spraying which can exhaust the extra paint mist.
Shenzhen Xinqinfeng industrial equipment co., LTD. was established in 2004.The products are sold to various regions of mainland China and foreign countries.From a development department,Xinqinfeng has become a professional manufacturers which currently specializing in non-standard automatic mechanical Equipment’s development, design and production, with standard large plant and advanced production equipment.After years of unremitting efforts and accumulation, Now Xinqinfeng specializes in industrial automation equipment with considerable scale and strength.
Main products include industry surface automatic painting, automatic drying, as well as automatic spraying the entire plant planning, designing and manufacturing, as well as industrial robots, robots, automation equipment and other non-standard test equipment.
Main Products:
Company Pictures
Other Hot Selling Equipment :
Packageing & Shipping:
it will packed by the vacuum membrace firstly, Then use the square box section to fixed,finnaly the equipment will be sealed with the wooden frame.
Our Service
Pre-sales:
1. Offer professional advice and provide the best solution for the customer
2. According to customer's needs or requirements, Our engineer will offer the drawing and solution for you.
3. We will offer the competitive price according to the customer's solution
After-sales:
1. We will send the engineers for onsite installation, commissioning and operation training.
2. We will provide fault handing service and lifetime warranty.
3. We provide 1 year warranty for each machine.
4. We will contact you back periodically to learn machine conditions.
5. We also provide the service for further extension on your existing machine.
FAQ
Question 1: I don't know anything about the machine. Will you provide the technical support?
Answer: Sure. Every machine will be test before delivery. We will make sure there is no problem for the machine while it leave our factory.
When the equipment is small and standard ,such as five axis spraying equipment,mini spraying line, small tunnel furnance or ovens,spraying power booth,curing furnace etc, We can send the detailed user manual and video to
help you install and operate the equipment. Of course,You can arrange 2-3 smart workers to come to our factory to learn how to operate the machine.
If the machine is spraying line and big,When the machine arrives your factory, we will send the experts to your factory to help for installation and commissioning. Operation training will be provide. Maintenance tips will be given and enough spare parts be provided.
Also, we provide consulting service for creating the proper facilities for running the machine.
Question 2: What is price of the machine?
Answer: Normally, Most of the machine is customized for our customer. If you have any drawing or any information on specification of the machine, please send to us for quote.
If you are totally new in this area, please send us the detail infos about your workpiece as blow:
1. The maximum size of workpiece:
2. The max weight of workpiece:
3. The output per month/per day:
4. Heating Temperature and Time(If you need the drying equipment):
5. Color changing(How many colors? How long will it take to change other colors ?)
6. Spraying process(What paint will you use? Spraying times? )
7. The workshop size for the equipment:
8. Some work-piece pics are needed:
9. The power: industrial three phase voltage
10. Other requirements from customer:
We will provide our professional suggestions and work out an appropriate design for your project.
Then the quotation with detail specification will be offered to you ASAP.