Automatic disc oil centrifuge for centrifuge for cleaning waste oil
Introduction:
It is a type of vertical centrifuge. The rotating drum is installed on the upper end of the vertical shaft and it rotates at high speed driven by the motor through the transmission device. According to different slag discharge methods, it is divided into intermittent slag discharge, manual slag discharge, and nozzle slag discharge .it can be used in chemical and pharmaceutical industry for debris and enzyme treatment, oil separation and recycling, dairy products, beer, wine, fruit and vegetable juices.
Disc separator can complete two operations: liquid-solid separation (low concentration slurry separation), said clarifying operation; liquid-liquid (or liquid-liquid-solid) separation (emulsion separation), said separating operation. Disc separator with its compact, small footprint, high production capacity and other characteristics, which is widely used for animal fats, offal, wool sewage treatment and other animal oil industry. Separator’s parts which contact with materials is made of stainless steel, conform to food hygiene requirements.
Model |
Capacity (L/h) |
Basket Diameter (mm) |
Rotation Rate of Drum (r/m) |
Separation factor |
Power (KW) |
Slag discharge way |
Weight (kg) |
Dimension (mm*mm*mm) |
DYDH270 |
2000 |
270 |
7200 |
6950 |
4 |
automatic |
550 |
865*645*1100 |
DYDH315 |
3000 |
315 |
6500 |
7000 |
5.5 |
automatic |
650 |
900*600*1150 |
DYDH385 |
4000 |
385 |
6500 |
7500 |
7.5 |
automatic |
750 |
1100*1050*1250 |
5000 |
430 |
6000 |
8050 |
11 |
automatic |
900 |
Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor
(1).Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.
(2)The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 304SUS
(3)The Stainless steel cover use SUS304
(4)The base use casting steel, coating does the same way as ship bottom.
Pre-Service
1. 24 hours onlinne consult and service
2. Introduce the details of products to the customers, answer the question raised by customer at firstly;
3. Providing the operation , installation and working video for customers.
4. Providing the different solutions for choice according to the needs and requirements of customers;
Sale Service
1. Ensure new product with high quality before delivery;
2. Packing according to the export requirements and shiping carefully;
3. Provide full set of documents as customer’s requirements.
4. Providing one year sparing parts for you for free.
5. Delivery on time
After-sale Service
1. Help to install and debug the equipment, Our technicians could be dispatched for
overseas service.
2. Provide 24 hours techincal support by e-mail or phone;
3. Abundant spare parts in stock are available to provide.
4. Help customers slove any other questions about products or other aspect;
5. Your workers could get trained both in our factory and yours.
Service Commitment
1. We will provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
2. Consultant services for whole machine life, 24 hours technical support by email and telephone.
3. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.