main feature of QT12-15F concrete block making machine 1. base frame : Qt12-15F concrete block making machine has a heavy machine frame ,with 200*200mm with 10mm thickness , the frame is made of high-intensoty steel and goes through heat treatment , the total frame weight is 15.5tons ,hence it is absolutely worn resistant .
2. feeding and vibration system : since the QT12-15F automatic block making machine uses multi-shaft rotating and compulsory feeding . It greatly improves the density and intensity of the blocks ,also reduces the feeding and molding time . In addition , low - frequency vibration in the feeding materials , high-frequency vibration in molding . It offers the optimal structure of vibrating shafts , hence it assures the vibration is distributed uniformly in the range of the vibrating table . So it improves the uniformity and stability of the blocks , produces better quality blocks than before when using the same ratio of raw material . and reduces the noise greatly .
3. Germany siemens PLC control system : QT12-15F block machine uses Germany siemens PLC control system and siemens touch Screen . Combine with the fault diagnosis system . It offers a dynamic display of the system's status , automatic troubleshooting , and a warning notice .
4. Frequency conversion Technology : since soft start function control has reduced the motor starting current , it protects the motor and extends its service life , because the main vibration adopts low-frequency standby . high- frequency operation , so it improves the speed of operation , And it also reduces machnical accessory and motor damage . most of all , the frequency converter saving about 30-40% power than the traditional converter .
5. Mold : the mold frame is made with inlaid structure , and the mold is processed via the procedures of carburzing , nitriding ,and quenching , so its service life can be up to 1200000 times production .
New updating improvement after the year 2017 : on the both sides of the mold , we add 3 aseismic bags for each side . they can reduce the impact force . protect the mold and oil cylinder in the molding process greatly .Add 2 pcs of guiding shaft and one adjusting wheel on each side , so it is easy and faster to adjust the material feeder height . Regarding the materials feeding system , a bigger and solid swing feeding arm replaced the hollow one , the motors changed to one bigger motor since one force is more concentrated and synchronous than two
PLC intelligent control is |
Siemens |
Mold is made of |
manganese steel |
Lifetime of the mold |
900,000 - 1200,000 times |
The continuous production time of the brick machine |
24 hours(one day) |
Required number of workers |
About 4 people |
Whether need Pallet or not |
yes |
How many pallets needed |
about 1500 to 2000 pcs |
Overall Dimension |
8200×2600×3020(mm) |
Rated pressure |
21MPa |
Main vibration form |
Platform vibration |
Acceleration of vibration | 15-20g |
Cycle Time | 15-20seconds |
Vibrating Frequency | 2800-4500 rolls/minute |
Vibration | 100KN |
Standard Set | |
Motors Power | 66KW |
Weight | 15.5T |
Pallet Size | 1420*920*30(mm) |
Raw Materials | crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, expanded perlite, and other industrial wastes |
Applied Products | concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc. |
Brief introduction | ||||||
Particular storage and discription material system insure the feeding accuracy and avoiding the effect of exterior material. So the products have high density. Adopting synchronization vibration insures the products making average. The frequency can change according to different technics. Low frequency in feeding material, high frequency vibration makes the different material to have a optimal vibration way. The computer is of fault diagnosis system. Warning signal is propitious to eliminate the fault. Combine with long-distance controlling system, it can achieve scrutiny, controlling, diagnosis. |
||||||
Control system: | ||||||
PLC intelligent control. Man-machine interface, control system equipped with complete logic control, production program, malfunction diagnosis system and remote control function. So it doesn’t need a professional person but only need a simple trained one to the operator. Product scope: It produces various bricks/blocks including color-face bricks (layered material feeding),through-body tiles,lock linkage blocks, road curb bricks, hydraulic blocks,hollow blocks, perforated bricks, and standard bricks etc. |
||||||
Main Technical Specifications | ||||||
Overall Dimension | 8200×2600×3020(mm) | |||||
Rated pressure | 21MPa | |||||
Main vibration form | Platform vibration | |||||
Acceleration of vibration | 15-20g | |||||
Cycle Time | 15-20seconds | |||||
Vibrating Frequency | 2800-4500 rolls/minute | |||||
Vibration | 100KN | |||||
Motors Power | 53KW | |||||
Weight | 14.5T | |||||
Pallet Size | 1420*900*30(mm) | |||||
Raw Materials | crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, expanded perlite, and other industrial wastes | |||||
Applied Products | concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc. | |||||
Productivity of HFB5250A block making machine | ||||||
Brick Style | Size mm | Cycle molding | QTY /Mould | Per hour | Per 8 hours | |
Hollow brick | 400*200*200 | 15--20S | 12 | 2160~2880pcs | 17280-23040pcs | |
Prorous brick | 240*115*90 | 15--20s | 30 | 5400~7200pcs | 43200-57600pcs | |
Solid block | 240*115*53 | 15-17s | 70 | 14823~16800pcs | 118588-134400pcs |
1.Our factory has these certificates ,etc.
2.Guarantee for one year and after sale service for whole life. To offer free design, free technology support and free machine maintenance trainning.
3.We have more than 30 years manufacture experience.
4.We are the biggest and most famous supplier in China: total 4 factories with 353,000M2 and yearly selling above 100 Million USD.We have a factory in Vietnam.
5.Materials of our products are from famous factory,like PLC intelligent control is Siemens;about mold,we use Manganese steel which stronger than A3 steel,etc.
6.Ever exported to more than 132 countries and area.
Packaging | Standard Export Sea-Worthy Packing |
MOQ | 1 pcs |
Gross weight | 14.5T |
Container | 3×40 feet container (40HQ) |
The above cover to what equipments | please refer to our quotation list |
Send your Inquiry Details in the Below , Click "Send" Now !