Hotels, Garment Shops, Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
concrete grinder and polisher stone floor polishing machine
Inverter:
1.5KW(3.0HP)
Frequency:
50/60HZ
Plate Type:
Plate Type Standard 10 inch grinding head
Plate Bolt Types:
M12x25 countersunk socket head
Rotation speed:
1730 rpm
Size:
680*220*60mm
Number of milling Parameters:
12 piece
After Warranty Service:
Video technical support, Online support, Spare parts, Field maintenance and repair service
Local Service Location:
None
After-sales Service Provided:
Free spare parts, Online support
Certification:
CE ISO
Supply Ability
Supply Ability:
100000 Roll/Rolls per Year
Packaging & Delivery
Product Description
Introduction and Description
This manual is intended to provide operation and service information necessary for the
safe and efficient use of this Floor Grinder. Operating or servicing the unit other than in
accordance with the instructions given may subject the machine to conditions beyond its
capability. This may result in the machine failure or personal injury
IMPORTANT:
Read the entire operating manual carefully before attempting to use the floor grinder.
Special attention should be given to the section entitled “Safety Precautions”.
The floor grinder is a sturdy, reliable and easy to use machine.
The floor grinder is fitted with a 1.5 hp (110V/60Hz) / 3.0 hp(220V/50Hz) single phase
motor. This motor offers a direct drive to the grinding plate by way of a flexible coupling
between the motor and the plate.
The shroud system is unique in design by automatically adjusting to suit segment height
and floor angle. This shroud system when used in conjunction with an appropriate
industrial vacuum unit helps eliminate dust during grinding. The shroud has 2 removable
sections to allow the operator to maneuver the grinder close to the wall. Please note that
fugitive dust will likely occur when using the grinder with the two shroud sections
removed.
The floor grinder comes complete with a water connection for wet grinding, if required.
The water connection incorporates a ball valve that allows the operator to regulate the
water supply to obtain the best grinding results.
The floor grinder has a foldable handle which enables it to be easily transported in the
trunk of most vehicles. The rear wheels can be extended outward for added stability
during use. The operator can raise or lower the height of the handle to maximize comfort.
The newly designed lifting handle system makes the machine easy to lift.
Technical Data
Motor HP
1.5hp
3.0 hp
Motor KW Rating
1.1kw
2.2kw
Voltage
110V/60Hz
220V/50Hz
Motor RPM
1730 rpm
1410 rpm
Unit Weight
132 lbs./60kg
132 lbs./60kg
Plate Type
Plate Type Standard 10 inch grinding head
Plate Bolt Types
M12x25 countersunk socket head
Main Construction
Powder Coated Steel
Detail Images
Operation
The floor grinder is designed to be used either wet or dry. If the application requires dry
grinding,a suitable industrial vacuum is required.
Consult Safety Data Sheets for the materials being ground. Concrete dust and floor
coatings contain materials that can be harmful. SEE SAFETY PRECAUTIONS FOR
Silica Dust Warning.
Contact your industrial hygiene professional for detailed information on required
personal protective equipment PPE. Always use appropriate personal protective
equipment (Hearing, Eye, Respiratory and Hand Protection).
Operating the Grinder
1. Make sure the diamond tooling is suitable for the material being ground and that the
tooling is correctly balanced.
2. Ensure that the grinding plates are in good condition and properly mounted. Never use
damaged tooling.
3. All countersunk bolts must be tightened to specifications and firmly in place. Take
periodic breaks to ensure that bolts are properly tightened, as they can loosen during
operation.
4. Check that the grinding plate is adjusted so that it sits level on the work surface (use
the bubble-level on the machine as a reference).
5. Check that all nuts and bolts on the folding handle latch are tight and secure.
6. Raise the grinding plates from the floor.
7. Start the motor by pressing the black switch on the starter box
8. Lower the grinding plate and begin grinding. Keep the grinding head moving side to
side on the work surface to create an evenly ground surface until the desired results are
reached.
Stopping the Grinder
Depress the red stop button on the start box.
Note:
The position of the axle may be adjusted as needed for leveling.
1. Adjust the vertical grinding position by loosening the level adjustment fastener counter
clockwise.
2. Lifting the level adjustment handle raises the back end of the grinder.
3. Lowering the level adjustment handle lowers the back end of the grinder.
4. Use “bubble-level”, mounted on the machine as a reference.
5. Secure desired grinder position by tightening the level adjustment fastener clockwise.
Cooperative Partner
We have 15 years of flooring experience, selling all kinds of flooring machines, including floor grinding machines, polishing machines for Southeast Asia, Europe and America.
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier