Structure         

· Aluminum casting case to keep spinning stable

· Liquid disk made to resist most of the corrosive solutions

· Drainage outlet and vacuum pump connector are on back panel

· One filter is included in standard package. It is used to connect the coater for preventing waste water flowing into the pump

· One oil-less vacuum pump is included in the standard package.

Chamber  & Vacuum Chuck 

· Chamber Diameter: 145 mm

· 3 sets of PP anti-corrosive vacuum chucks with chuck o-ring come in different sizes (1'', 2'' and 4'')

· 1 piece of adhesive tape (6'' W x 24'' L) is included  for coating irregularly shaped substrates (e.g. Place the irregular substrate on the adhesive tape, then the vacuum chuck will hold the tape by suction)

· Mini suction cups are available for the small wafer with less 1" Dia. or substrate with regular  ( 5x5, or 10x10mm) or irregular shape. 

Vacuum Pump

· Vacuum grade rubber pipe is included for immediate use

Spin Speed & Time 
 

· Digital control panel with TWO programmable segments for different spin times and speeds

· Spinning speed: 500 - 8000 RPM  

· Spinnning Time: 1 - 60s

Liquid Injecting

· 20mL syringe is used to contain the coating material

· The syringe holder height can be adjusted and rotated freely along the support rod 

Optional

· You may choose Precision Electronic Single Channel Pipette: 20 - 200uL for more accurate coating 

· Using plasma cleaner to treat substrate surface before coating can improve film quality

· You may consider our new product: Heatable syringe 

· Vacuum Flash Assembly for DIY Vacuum Flash-Assisted Solution Process (VASP), Up to 5 mTorr is available 

Input Power

110VAC or 220VAC please select the voltage in options bar (10A fuse)

Motor Power

24V DC motor  with 150W Max. 

Product Dimensions

13''(L) x 10''(W) x 8.5''(H)

Net Weight

15 kg (33 lbs)

Compliance

· CE Certified

· NRTL certification is available upon request at extra cost  ( Please notice us before ordering if you need NRTL )

 Warranty

· One year limited with lifetime support

· Rusting and damage due to improper storage condition or maintenance are not covered by warranty

Shipping Weight

        46 kg (100 lbs)

 Application Notes

· In order to achieve optimal coating quality, please consider cleaning substrates by a plasma cleaner (click the pictures below for more details) prior to coating. This will significantly reduce the surface tension on the substrates. 

· Cleaning instruction for the spin coaters.

· You may consider our new product: Heatable syringe and spin coater with heatable cover

· Strongly suggest you put the coater under a fume hood as below right

· When using the coater in glovebox with Ar gas, vacuum pump must put in outside the glovebox via vacuum feedthrough or adaptor

Warnings

· Do not overflush the water bowl/base with any kinds of liquid. Excess liquid will leak into the motor shaft and cause damage. Please use fabric cloth to wipe out the residues remain in the bow/base.

· If necessary, turn on the water outlet when flushing the water bowl/base to avoid liquid overflowing during the operation.

· For more details about the cleaning procedure, please review the cleaning instruction for the spin coaters.

Shipping Dimensions

40"(L) x 28"(W) x 24"(H)

Shipping Weight

46 kg (100 lbs)