1,Application: Model: QGGF-60YP
Suitable for Tube size: Dia 13 – 50mm PVC composite tube
2,Sealing type: Straight line or other different type for PE tube
3,Range of application:
This machine applies for production in cosmetic, light industry (daily use industrial goods), pharmaceutical and food industry etc. It can fill material such as grease,ointment,gel and sticky fluidextract into tube, then seal the tube end, stamp number and discharge finished product.
4,Proper tube material and filling material:
(1) Plastic composite tube
(2)Grease, ointment, gel and sticky fluid extract.
5,Working process flow:
Tube cassette (Tube Dispenser) → Automatic tube loading →Sensor detecting and tube centering → Internal tube air blowing (option) → Tube filling→ Tube end hot melt→ Tube end pressing and stamping→ Tube fixing →Tube end trimming→ Finished product discharge
6,Working principle:
Adopts PLC control, Automatic tube loading,Sensor detecting & Tube centering,tube inside air washing(option),filling nozzle gets down to fill, tube end internal wall hot air heating, external tube end cooling (circulating water cooling by chiller),hot melt pressing and stamp number,tube end trimming, finished product discharge.
Main Characteristics:
Ø The transmission part is closed under the platform safely with no pollution.
Ø The Loading and Sealing part is installed in the visible cover,which is in the half-closed static-free frame above the platform.It is easy to watch, operate and maintain.
Ø Stainless steel operating panel with touch switches.
Ø Optional vertical and sloping tube storage.
Ø The arc rail is matched with vacuum absorbing device. When the rail and the pressure tube are working together, the soft tube is fed into the upper working station.
Ø The photoelectric target-aiming working station employs accurate detector and marching type motor,ensuring the tube design at the correct position.
Ø When filling is finished,the end is blown away by the air blower.
Ø No feeding is done when there is no tube available.
Ø The heat blower goes into the tube end for sealing, and the outer part is equipped with cooling device.
Ø Character code printing working station automatically prints the character code at the place required by the process.
Ø The reshaping manipulator cuts the soft tube into right-angle shape and round shape for choice.
Ø There are alarm devices for failure and no tubes. The machine stops working when the door opens or overloading happens.
Ø The machine stops working when counting the number or fixing the quantity.
Techincal Parameter:
Tube type |
Plastic and Compound tubes |
Production Capacity |
30-50tubes/min (according to your material) |
Filling Range |
3-250ml |
Suitable Tube Length |
50-240mm |
Suitable Tube Diameter |
13-50mm |
Working Pressure |
0.5-0.6MPa |
Compressed Air Consumption |
1.1m3/min |
Tube end pressing and printing type |
Single-side printing Double-sides printing |
Power supply:
Power Supply |
50Hz/380V 3P |
Main Motor |
1.1KW |
Hot Air Generator |
3KW |
Vacuum Pump |
0.4KW |
Water Chiller |
1.5KW |
Jacket barrel heating power |
2 KW |
Jacket barrel blending power |
0.18 KW |
Infrastructure
(about)2m2 |
|
Working Area |
(about)12m2 |
Water Chiller Landing Area |
(about)1m2 |
Working Area |
(about)2m2 |
1950×1000×2280mm |
|
Integrated Structure |
Union mode |
Weight |
(about)750Kg |
Suitable Packing Material & Other Devices
Suitable Packing Material |
Plastic tube and composite tube |
Obliquely Hanging Lining-up Tube Storehouse |
Speed Adjustable |
Material contacting with filling material |
316L Stainless Steel |