.
99.8% Response Rate
99.8% Response Rate
99.8% Response Rate
Type: 2 in 1 function board
Lightspot: Support multi-machine working, use one COM
Support Cards: ISO14443A/ISO7816
This board is 2 in one function that can read/write RFID card and SAM/IC card. When with single function, those on board electronics components may different.
Level: 0.2mm to 1.2mm
Default : original set at 0.8mm
Cover range: suit for 0.7-0.9mm thickness cards
This gate set for preventing double card was drived into transfer channel, to keed issuing card accuracy and steady.
Material: Customized Rubber
Structure: Special design for enhance friction
Feature: more contact surface with card.
Capacity: 25pcs
Fill full alarm: YES
With same model F3 card dispenser, there are 3 optional specification. as:
1. With ISO14443A RFID reader module that can read and write cards in such
standard, typical card as S50, S70, FM11RF08, NTAG203/210/212/213.
2. With ISO7816 contact IC card read and write module, operate with those card with contact
interface such as SLE4442, 4428, SAM card, SIM card etc...
3. Above 2 functions in 1 combine.
1. Dispense Mifare Card 13.56MHz card with read and write module or Contact IC card read/write module
2. Unique transfer wheel design for Accurate issuing any card even for concavo-convex character number card
3. Simple, convenient, stable and accurate adjusting kinds of different thickness for issuing different cards
4. Compact size design to save the installation space
5. Reclaim card tank design in rear of machine for easy management
6. Couple of sensor can detect reclaim card tank is full, card tank empty alarm, card position detect etc, can easy distinguish card position and status.
7. High strength and durable engineer plastic card channel make sure RF card read/write steady
8.Industry conceiving, surface dealing with roast paint, well bearable cubing and rotting. Be suitable to all kinds of bad environment, such as high, low, and mush dust, etc.
9. Multi- sensor protect function prevent outer light interference to sensor
10. 24V/2.5A
11. RS-232
F3 card dispenser is an issuing machine that operate with card size based on ISO/IEC 7810 Identification cards: ID-1
size, operate thinckness from 0.2mm to 1.2mm. From history production experience, plus good idea and innovation
design accumulated, this dispenser now equips reliable mechanism to make card issued smoothly and last for long
life time.
F3 card dispenser can be integrated with ISO14443A RFID reader module that can read and write cards in such
standard, typical card as S50, S70, FM11RF08, NTAG203/210/212/213.
Also, Can be integrated with ISO7816 contact IC card read and write module, operate with those card with contact
interface such as SLE4442, 4428, SAM card, SIM card etc...
Or, if necessary, above 2 module integrated together also available, then it support both contactless and contacted
cards.
Although it's standard loading card capacity at 150pcs, but it can support max 300pcs for extend requirements. And,
for programm design purpose, it can be set card enter from front mount, it can collect invalid card inside to the
collect box.
It's rubber wheels made of specially developed materials, with large contact surface and precise structural design,
make it increase lifespan, also enhances the friction during issuing card, that to ensure card dispenser working
stability .
SPECIFICATIONS FOR F3 CARD DISPENSER | ||||||
Functions | Operate ISO14443 cards: S50, S70, RF08, NTAG213 Operate ISO7816 cards: CPU T=0,T=1/SAM/SLE4442,4428/24C01-24C256 | |||||
Interface | RS-232 | |||||
Power Supplier | 24VDC( Max. current 2.5A, MIN current 0.1A) | |||||
Card size | Lenght: 85 +/- 1.5mm | |||||
Width: 54 +/- 1.5mm | ||||||
Thinkness: 0.2-1.2mm thick card(adjustable) | ||||||
Card Tank Volume | 150pcs @ 0.8mm; 130pcs for concavo-convex character number card | |||||
Optional plus extend card stacker to double loading card capacity | ||||||
Card Material | Polyester cards/PVC/ABS | |||||
Error Card Reclaim | 25pcs at 0.8mm thickness cards | |||||
Weight | Net Wight: 1.6KG /Packing weight: 3.5KG | |||||
Dimension | 225*100*220mm | |||||
Operating Temperature | 20 to 60 C-degrees | |||||
Operating Humidity | 30%-90% RH | |||||
Carton Packaging | ||
Number | 4 sets / Carton | |
Weight | 10.80kg / Carton | |
Packaging Details | Carton Size: L*W*H=52cmx31cmx32cm | |
Carton and Pallet Packaging | ||
Pallet | L*W*H=1200x1100x1400mm | |
Weight | 345KG | |
Packaging Details | Plastic Pallet; Each layer: 8 cartons; Layer structure: 4+4 Total: 4 layers; Total Carton: 32 cartons; Total product number: 128sets; Special packing requirement negotiable. | |
* Inquiry and consulting support.
* Sample testing support.
* Prepare stock.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
