Automatic Precast Hollow Core Concrete Slab Interior Wall Panel Machine Gypsum Board Making Machinery Replace Adobe

WELCOME TO HONGFA MACHINERY

Automatic Cement EPS Sandwich Wall Panel Making Machine

Model: HFP512A

A) Material:

EPS mortar as core material.

Calcium silicate board as the surface material.

Properly mixed with fly ash, slag and additives.

Note:The two surfaces of the new type composite sandwich board are composed of high strength water resistant, calcium silicate board with good waterproof properties.

Good thermal isolation EPS bonding mortar as core material.

B) Product size and type(Flexible):

Size:  Length 2440mm(Max.3300mm) Width 610mm   Thickness: 60-250mm (size and thickness can be adjusted).   Type: Hollow / Solid

C) Application:

High, multistory building as non-bearing wall, also can be sound insulation, fire partition wall.

This product’s application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and other performance indexes all reach or over the relevant national standards.

D)Cement EPS Sandwich Panel Advantages:

1. Solid, lightweight, thin body;   2. High strength, impact resistance, strong Hanging force, heat insulation, sound insulation, fire prevention, waterproof;   3. Easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protection. Saving cost.   4. Reduce wall occupying space, increase the rate of using residential space, reduce structure load, promote building anti-seismic ability and safety performance, reduce the comprehensive cost.

Why invest an EPS cement wall panel line? 

Advantages of Project

(1) Low Input and High Profit

 The main raw materials of this light wall panel are industrial residue fly ash, slag, ceramic, portland cement and EPS foam particles, the production process is simple and low cost.

(2) Advanced Technology

(3) Fully Meeting Requirements of Building Function

The overall world development trend of brick from clay to non-clay, from solid to hollow, from the small to large, from the heavy to light, from low intensity to high-strength, high to low energy consumption, a single function to multi-wall development. And the project is stressed to wall lightweight, high strength, thermal insulation, waste utilization, energy conservation and other functions. Therefore, the implementation of the project is imperative.

(4) Low Business Risk

(A) long-term stability advantages: Due to the limit of functional requirements of the restrictions and sources of raw materials needed to be broad and rich, but also by limiting the requirements of the human environment, the wall construction material development developers is relatively difficult.Once this kind of wall material is successfully developed and is recognized by the government and society, its competitive advantage will be relatively stable and long-term business in the market.

(B) Mechanization in production, less workers but high output and stability

(C) It is a comprehensive utilization of the industrial wastes project, and will get a great support by the State.

Production Infrastructure Requirements

Water: to produce 60m2 panel(9 cm thickness as example) required one ton of water. No special requirements for water quality, clean water can be used for production.

Electricity: installed power 100 kw (depending on the capacity).

Air and steam: Air compressor and boiler.

Land: 1200-2000m2 workshop and 9 meters high (depending on the capacity).

Labor: 6 workers in total(take capacity 100,000/yearly as example).

Production Flow

Production Line Layout

Production System is divided into 5 parts:

(1) Panel Molding System

(2) EPS Expanded System

(3) Mixing System

(4) Mobile Slurry Grouting System

(5) Mobile De-Moulding & Turnover System

We have 3 types of production line for options.
Differente Investment

Successful Cases