This kind of Commercial Apple Peeler Corer Slicer is portable and can peel, core, cut, slice in one time for apples, pears, lemons etc It is made with stainless steel 304, automatic operation .It is in a ready market, and nowadays the apple peeling machine is widely used in fruit processing company or factory ,fast food company etc .
the pomegranate enters the upper crushing device from the feeding hopper. After the relative extrusion of the crushing roller and the pressure of the blade on the roller, the whole pomegranate is squeezed and cut into several small pieces; the crushing roller of the upper crushing device is made of stainless steel, two rolls The gap can be adjusted to 20-30mm; then enter the lower crushing device for the second crushing. The lower crushing roller is made of non-toxic and highly elastic rubber. The damage to the pomegranate seed is small, and the gap between the two rolls can be adjusted by 10-20mm. After the stage crushing, the pomegranate which has been separated by the basic skin seeds falls into the separation device (separation shaft and rotary sieve combination) with variable frequency speed regulation. Under the rotation of the separation shaft and the separation device, the pomegranate seeds and part of the juice are sieved from the sieve. The pores leak out and pass through the discharge port to the next process (transferred to the juicer or other via a screw pump); the pomegranate peel is discharged from the tail of the device.
This machine can "pick up" the granules of pomegranate, orange, lemon, grapefruit, passion fruit, orange and citrus, and remove the capsule, membrane and fruit seed purely mechanically.
It is a key equipment for the processing of pomegranate juice, beverages and cakes.
This machine is manufactured in accordance with EU standards.
Program control plus remote control,
Stainless steel for main and outer casings,
Electronic components and PLCs are used by Japan Omron or Siemens, Germany.
Aesthetic hygiene is in line with modern food regulations.