Function and Features Description
1,The system supplies the 2 part a:b glue in a predetermined ratio,amount and controlled temperature into the mixing head. The two-part media will do final mixing by the Rotary Static&Dynamic disposable mixer to deliver a fully homogeneous consistency.
2,Adopting double stepper motor drives precision metering gear pump or screw pump, effectively prevent the abrasion of the glue filler on the pump.Flow rate up to 20L/H.Seals/O-ring is made rubbers material. Durable and long life.
3,Adopting the dynamic mixing or static mixing valve,High precision of mixing ratio, repetition out-gluing rate stably and evenly performance. close the glue not drawing and not leak.
4,The machine is made of stainless steel 304 or Metal material. The material tanks consist of corrosive resistant chassis,tank covers,5--6mm thicker drum wall,and explosion-proof base and outer cylinder.It is durable and can hold vacuum and more safer&reliable.
5,Two tanks keep AB material separated before they mix, to ensure the raw materials anti- solidification for a long time. Opening the function of anti-curing can efficiently prevent the AB glue solidification in the pipe.
6,The material tanks is equipped with explosion-proof electric mixing motor,and liquid level sensor which when the glue is below the liquid level or the lack of material, the machine will be auto-alarm and stop, after feeding auto-working.
7,The Tank's Additional function for you choose: 1) Electrical heating jacket:heating up the glue from room temperature to 120 degrees centigrade with temperature sensors. 2)Vacuum function:can removing the degassing&air bubbles.And feeding material. 3)Stirring function: The tanks top stirring function can prevents the glue subside. work at regular time and fixed speed. 4)Cleaning function: the equipment can automatic clean,without dissembling the mixing pipe and Static&Dynamic disposable mixer.
8,PLC with Touch Screen,display language is both in English and Chinese.Easy programming and dispensing of Single shots,continuous output etc.Memory function, Zero malfunctions during 12months.CAD file can be imported and downloaded via USB.Easy to operate, normally you can learn all operation in 10 minutes.
9,More functions can be available to meet up with customers’ special requirements.
TFT-4331 | TFT-5331 | TFT-6331 | |
Working Range | 400*300*300*100mm | 500*300*300*100mm | 600*300*300*100mm |
Size(L*W*H) | 1200*900*1510mm | ||
Machine Weight | About 210 KG | About 220 KG | About 230 KG |
Suitable Material | Silicone,Epoxy,PU,etc MAX Media Viscosity: ≤50000 cps | ||
Out-Gluing Rate | 0.5g--50g/sec,digital setting Repeat Accuracy :+/- 0.02mm | ||
Mixing Method | Dynamic /Static,optional AB mixing head: 1--4 pieces,optional | ||
Mixing Speed | At regular time and fixed speed | ||
Maximum load | Y-axis:5--10KG, Z-axis: 3--5KG | ||
Moving Speed | X/Y-axis:0--500mm/sec, Z-axis: 0--400mm/sec. | ||
Display+Edit mode | PLC+Touch screen, in English. | ||
Program Memory | 100 programs, 4000 points for each program. (can be copied from U disk) | ||
Operating Mode | Single shots,continuous output,circle,arc,circle,and any irregular patterns etc. | ||
Drive Motor | Double stepper motor+Silk pole/Synchronous belt | ||
Mixing Pump | Screw pump or Gear pump,Optional | ||
Mixing Ratio | 1:1--10:1 any combination | ||
Dynamic Speed | 200--1500rpm adjustable | ||
A&B material tank | 5L,10L,20L,30L,40L,50L,60L,Optional | ||
Tank Function | Stirring+ Heating+ Vacuum +Cleaning, Optional | ||
Vacuum | Feeding material/Degassing | ||
Interpolation | 3-Axis (all lines of 3D cubical space are adapted) | ||
Driven Type | Electric+Air compressor | ||
Input Air Pressure | 0.4--0.8 M Pa Working Air Pressure: 0.4--0.7 M Pa | ||
Input power | AC110V---380V, 50HZ Power Consumption: 1000W | ||
I/O Signal | 4 inputs/ 4 outputs Control interface: RS232 | ||
Work temperature | 5℃—40℃ Working humidity: 20%—90% non condensing |
Q: Are you a factory or trading company?
A: We are factory. Your OEM or ODM orders are gladly accepted.
Q: How long is your delivery time?
A: Generally it is 5--10 days if the goods are in stock. Or it is 10--30 days if the goods are not in stock.
Q: Do you test all your goods before delivery?
A: Yes,we have 100% test before delivery.
Q: Warranty and after sales service
A: One year warranty free for spare parts, Whole life technical support.
Q: What is the terms of payment you accept?
A: Payment≤USD5000, 100% in advance. Payment≥USD10000, 50% TT in advance, balance before shipment.
Q:What information shall I provide you when I need your offer?
A: 1. Please send me the parameters or streaming video of glue&liquid. 2. Product pictures and dispensing requirements etc. So that we can quote you exactly machine what you need.
Q: Where is your factory located? How can I visit there?
A: Our factory located in Shenzhen city,Guangdong province,China. You can fly to Shenzhen airport directly and we will pick you up there.