Auto Servo Baby Diaper Production Line Baby nappy Making Machine Manufacturer in China

1.Product structure: Normal thickness type product:double layer leg cuff non-woven, surface layer non-woven ,ADL, upper layer
tissue, under layer tissue( cotton core + SAP mixed), laminated non-woven, frontal tape (velcro,cartoon online positioning),
side tapes, waistband elastic ribbon, leg cuff elastic ribbon, leg elastic ribbon.
2.Cotton core structure: stripe type and splayed type (splayed shape, narrow in middle and wide at both ends).
3.Diaper size: NB,S,M,L,XL etc.
4.Stable production speed:please see the above chart.
5.Production center distance: Referring to distance between the center line of product material and main frame plate, 300mm.
6. Spread of raw materials: upper is surface layer for absorption, under is back film
7.Product weight tolerance: ±5%
8.Rate of finished product ≥I type 98% , (not including the defective products caused by glue applicator, feeding of
raw materials and joints of raw materials)
9.Efficiency range≥90%
10.Power: 380V/50HZ
11.Installment power :≥about 240KW
12.Machine Weight:About 45Ton
13. Power source:380V ±5%,50HZ, 3 phase 4 wires + ground wire
14.Supply air pressure: 0.6+0.8Mpa,37kw air compressor is enough for supply air for machine. Air consumption:5.8m 2 /min.
15.Working direction of machine:to be defined by buyer
16.Machine color: to be defined by buyer

Delivery & Packing
Seaworthy wooden cases and plastic film packaging or as customer request.

( Click the picture to link detail page )