Auto Cross Conveyor Belt Sampler Machine for Manganese Ore
It takes complete cross section of sample from moving conveyor belt; it consists of motor ,speed reducer ,rotating sample cutter,approaching switch, frame and casing and so on .The equipment is manufactured in accordance with standard of GB/T475-2008 and standard GB/T10355.1-2000.
Typical applications
This equipment is mainly used for automatic sampling of sinter,pellet,ore powder.coal,coke and solid material conveying by belt
Features
1.Belt width:400-2000mm
2.It cuts the complete cross-section of the stream at uniform speed,the samples are even;
3.The equipment is reliable and easy to be installed and operated;
4.It avoid the effect of the human factor to the material,which can make sure the sample is
accurate with high representativeness and scientificity;
5.Both manual and automatic operation is available,which reduces the labor intensity and insures personnel safety.
Technical parameter
YK Conveyor belt central sampling machine |
|
Sampling capacity |
1-5kg/time or as customers’ requirement |
Sampling interval |
1-999min(adjustable) |
Sampling time required |
Every half an hour by auto timing System. |
Rotating speed |
0.3seconds |
Ratio of gear |
5.2r/min |
Speed ratio |
i=1.666 |
Powers on time |
19.23s/time |
Power |
2.2kw/3kw/4kw |
Protection standard |
IP55 |
Model No.of Motor |
YES90S-4 |
Working voltage |
380-400V,60HZ |
Total weight |
800kg |
Time control |
Controlled by time relay and travel switch |