This product is mainly used in the daily repair. Such as repair of leather,rubber,wood,fabric,paper etc.
Applied to interior decoration, automotive interiors decoration, furniture and other industries. Also Adhesive to wood, MDF, fire board,aluminum composite panel, leather, rubber, fabric,paper and other materials.

1.Adhesion surface should be oil decontamination and smooth,clean,dry.
2.Use scraper or brush with sticky material in the glue evenly on both sides if a large area bonding, it is proposed that coating the two adhesive surface at the same time.
3.Let it dry at room temperature 5-15 minutes, when the glue is not so sticky then drawing a one-time at the bonding, extrusion from the inside out to remove air bubbles,percussion compaction,it reach use strength after 24 hours.

1.Ventilation conditions in the use environment,and fireworks is strictly prohibited.
2.When opening the cover,use hand to hold down the voer in order to avoid glue's expansion because of the thermal emission.
3.cover tightly after use to prevent the volatile liquid become sticky.
4.Suitable for construction of the temperature above 15℃,no higher than 38℃,relative humidity less than 80%.
5.To avoid skin,eye contact, not entrance to mouth and prevent children's contact.
6.Please pre-tested before use in order to avoid errors.

1. Stock the fireproof contact cement in the air-tight seal at the temperature of 10-35℃. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as flammable products.

Carefully clean the surfaces be bonded, smear the glue on both surfaces, then wait for a while, about 10-18mins according to the room temperature joint the parts together and press them.