Aqua Care Electric Flojet water Pump 220v Bottled Water Dispensing System for 5 Gallon Bottles

THE DISPENSER INCLUDE:

Suction wand and hose assembly.
Pump module with On/Off switch.
6 foot cord with plug.
20 feet of 1/4" discharge tube
Universal seal cap: Fits any 3, 5, and 6 gallon plastic water bottle.
Installation and maintenance instructions.

FEATURES

Illuminated On/Off Switch Provides clear visibility in dark cabinets or hard to reach places
Long Life Motor Ensures years of reliable operation.
STARFLO Diaphragm Pump Provides dependable run dry capabilities, extending the life of the pump.
Quick Disconnect Ports Allows for easy wand replacement in seconds.
Quiet Operation Equipped with noise dampening rubber feet to minimize noise pollution.
Thermal Protection Prevents overheating, protecting the pump and control box from damage.

Flojet Bottled Water Dispenser For Coffee Maker Or Refrigerator Connector
PRODUCT DESCRIPTION
STARFLO BW4003A is the new design compare with BW1000A,BW2000A, BW3000A and BW2020A.
The difference among them is the different voltage, For BW 40003A, the voltage is 110V AC -240V AC.
Pump recipe-quality water from commercial bottles to ensure better-tasting hot and cold beverages. 
The Bottled Water System is designed to work with coffee/tea makers, refrigerator ice and water dispensers, 
espresso carts and portable sinks or any use requiring portable potable water.The Bottled Water System is also 
designed for convenience.The pump automatically shuts off when the water source is depleted and restarts when water is restored.

Full description

A fully automatic bottled water pump with 1/4" OD tube, fitted with UK plug.

This compact pumping system can deliver up to 3 litres per minute open flow from a variety of plastic bottles to any domestic appliance, coffee or vending machine, water cooler or icemaker and almost anything else needing an easy supply of drinking water.

The units are fitted with low water level switch for when the bottle is empty, an auto shut-off for when the outlet is closed or full and thermal protection on the motor.

A built-in check valve prevents back flow into the bottle.

This is an ideal pump for outside catering where mains water is unavailable.

The box contains a suction wand and hose assembly, pump module with 1m cord and a UK, a 20ft, 1/4”OD discharge tube and a universal seal cap fitting 3, 5 and 6 gallon water bottles.

If you running a remote or mobile coffee bar and need water for your coffee equipment, espresso machine, rinser or hot water dispenser you need fresh water. 

The Flojet Bottled Water Pump fits with office style water bottles or Jerry Cans. It then connects easily to your equipment. Connect multiple pieces of equipment with one pump.

The Bottled Water PLUS system is also designed for convenience-the pump shuts off when the water source is depleted, and when water is restored, the pump will automatically restart. This eliminates the chance of any damage to the appliance running dry.

Automatically , Eco-Friendly

*IIIuminated On/Off Switch:

Provides clear visibility in dark cabinets or hard to reach places

*Long life Motor: Ensure years of reliable operation

*Fojet Diaphragm Pump:

Provides dependable run dry capabilities,extending the life of the pump

*Quick Disconnect Port:

Allows for easy wand replacement in seconds

*Quiet Operation:

Equipped with noise dampening rubber feet to minimize noise pollution

*Thermal Protection:

Prevents overheating,protecting the pump and control box from damage

*New Ergonomic T-Shaped Wand Handle:

Allows for ease of installation and removal of wand from bottle

When a water bottle is connected to the system,fresh water is available for use with coffee/tea machines,water dispensers,refrigerators,ice makers,or any other application where portable water is needed.

Using method

1.Mount the system in a convenient location with access to power and space for the bottled water.

2.Install the suction tube into the water bottle

3.Insert the outlet tubing(20' provided) into the connector

4.Route the tubing to your refrigerator,brewer,or tap

5.Plug in the dispensing system

6.Press the switch on,and it's ready to use

Description

Liquid bottle dispenser is ideal for mobile locations or home users who can't or don't want to direct plumb. The Bottled Water Dispensing System will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator for the ice-maker and chilled drinking water tap, and to certain commercial coffee / tea brewers.

1.Easiest way to connect this to your filtration kit/espresso machine

2.Float switch for auto shut-off when bottle is empty
3.Built-in check valve to prevent back flow 
4.Universal seal cap fits most water containers    
5.Includes 6m discharge hose

6.Easy installed

Drinking water dispenser pump technical data: