Power Regulator Main Technical Parameters :
Model | PRSCR-LA |
Rated Current | 40A 75A 90A 120A |
Load Voltage |
380VAC |
Maximum Using Current |
12.5AX3 |
Maximum Using Power |
2.7KWX3 |
Reference Radiator |
G-80,D-120 |
Reference Fan |
80X80(mm) |
Operation Frequency | 50Hz/60Hz |
Rated Voltage | Three phase 380VAC FAN220VAC |
Over current protection |
Built in fast fuse |
Output Mode | Phase Output |
Hand Set Signal | 2W/10KPotentiometer |
Auto Control Signal | 4-20mA/0-5V/0-10V |
Use Environment | Less than 45℃,humidity less than 90%RH |
Dimension(mm) | 126W x 130L x 152H |
Installation Size(mm) | 116W x 90L(WXL) |
Mark: The center of Y connection must be connected with zero line, or SCR will be burned.
Power Regulator Installation Warning:
1. The main circuit adopts three-phase three-wire input without requirement for phase sequence.
2. Applicable load: Constant impedance, IR far-infrared Ray, UV lamp, etc.
3. For Y connection load, the center must be connected with zero line, if not so, relative equilibrium of three-phase must be required, or SCR will be burned.
4. SCR is a wall type, vertical installation ensures excellent heat dissipation.
5. SCR is a product with big current, please keep in mind that terminals (R.S.T) and (U.V.W) shall not be lock tightly, or SCR will be burned by terminal heating.
6. During the use of module, when the load power is more than 15KW, it's best to be equipped with proper radiator, and heat conducting silicon grease should be coated between radiator and SCR backboard with wind cooling.
7. Module protection: Please use semi-conductive fast fuse for load over current.
1. Q: Can you provide OEM service?
A: Yes, we can.
2. Q: What's the MOQ?
A: For testing purpose, 1pc is ok.
3. Q: Can you provide trade assurance service?
A: Yes, we are member of the Alibaba trade assurance scheme.
4. Q: What's the lead time?
A: General lead time is 15 days after payment.
5. Q: What's your waranty?
A: We provide 12 months warranty against manufacturing defective.