Anionic Surface Active Substance Vinyl Formic Acid/Methanoic Acid

acrylic resin reactor

Brief description of the process
In view of the principle of confidentiality for customers, the following can only briefly describe the process.
1. The liquid material is added from the liquid feed port on the top of the reactor, and the powder material (or slurry) is also added to the kettle through the manhole under the protection of a dust collector.
2.Stir in the kettle with a paddle mixer.
3. With the rotation of the paddle mixer, the liquid material and the powder material (or slurry) are gradually mixed uniformly.
4. When the materials in the kettle meet the quality requirements, open the bottom valve of the kettle. The finished material is discharged to the finished tank.
5.Fill from the finished product tank to the filling machine.

I. Market prospects:
Disinfectant series products are necessary disinfection products for families, hospitals, and public health, and they play an important role in disinfection and sterilization especially when major epidemics occur. The market prospect is broad.
Types and main ingredients of disinfectants:
1. 84 disinfectant: the main components are deionized water, sodium hypochlorite and a small amount of surfactant, sodium hydroxide, stabilizer;
2. Hand disinfection solution: divided into 75% ethanol solution and disinfection gel, the main components are deionized water, ethanol, or gel additives;
3. Bacteriostatic foam hand sanitizer: the main ingredients are deionized water, germicidal disinfectant, surfactant, and hand protector;

1). Unsaturated resin, alkyd resin, acrylic resin, polyester resin, curing agent and complete sets of production equipment.

2). Emulsion, white latex, water-based polyurethane, water-based glue sets of production equipment.

3). 107 rubber, silicone oil, anc other sets of production equipment, hot melt adhesive.

4). Complete sets of production equipment.

5). PU glue, adhesive, grafted gum syrup glue sets of production equipment.

6). Complete sets of raw rubber production equipment.

7). Waste silicone cracking, distillion, recycling sets of production equipment.

8). Dispersion paints, coatings, stirring and mixing equipment.

 fixed bed reactor

• 1. Unsaturated resins, alkyd resins, acrylic resins, polyurethane and other complete sets of production equipment;
  2. Latex, white latex, rubber coating, film coating, all-purpose adhesive and other complete sets of production equipment;
  3. Glass, plastic, silicone rubber, sealants and other sets of production equipment;
  4. Raw rubber sets of production equipment;
  5. Silicone waste pyrolysis recycling old solvent distillation recovery sets of production equipment;
  6. Hot melt adhesive sets of production equipment;
  7. Various types of powder mixing auger sets of production equipment;
  8. Various non-standard chemical equipment design, production and installation.

1. FY-20L ~ 30000L reactor;
2. NHZ-5L ~ 5000L kneader;
3. QF-5L ~ 5000L strong dispersion machine;
4. XJB-5L ~ 2000L planetary mixer;
5. DLH-5L ~ 1000L Planetary Power Mixer;

6. DSH-20L ~ 15000L conical twin-screw mixer;

7. WLDH-20L ~ 20000L horizontal ribbon mixer;

8. WZ-10L ~ 6000L weightless biaxial mixer

Q : Can you send the formula for the products we want to make ?
A : Our machines can be used for many kinds of product making ,
such as Resin , Paint , Adhesive , Cosmetic , Food , Chemicals . 
There are many kinds of these products , so it's impossible for us to know all the formulas and technologies .
We can assist you to find theraw material list you need , and after you place order with us ,
we can help you to find formula and technology , there will beengineers to teach you how to make the product ,
and the cost willbe on your account
Q : Do you have machines in stock ?
A : Yes , but just the small-scale machines Machines are different with other products , 
most of the large-scale machines are designed according to our customers'requirements , 
different customers have different production requirements , 
so the technical parameter is different for most machines On the other hands , 
most of the our machines will cover a large area , so once the machines are finished ,
we will effect shipment after QC .
Q: Can you send the detailed drawings of the machine to us before we place order?
A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, 
our engineer will design thespecific technical parameters fo you and send you the detailed drawings. 
Once you confirm without questions, we will put it into production
Q: Why does it take at least 20 days to finish the machine?
A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessoriesfor the production. 
Once the drawings are finished, our workerswill start the production, from welding, polishing, assembling,debugging, 
detection and so on. After finish, they need time tocheck the machines,
if found any possible defect parts, they will return to the production until every part is 100% approved
Q: Can we pay the balance after we receive the machines and test without problems?
A: It's unnessary to worry about the quality of our machines, weare confident in that. 
After the machine is finished. we can installand test the machine for you(
if you can not come to our factory,we can record a vedio and send to you). 
Only after you check without problems, we will effect shipment.