Maximum size of plate: 1,163×940mm.
Features: Less manpower, high stability and perfect output quality.
UV plate and thermal plate are available for you to lower production cost.
Furthermore, to improve the production efficiency, 32 channels, 48 channels
we are selling the pre-printing Equipment , CTP,CTcp, digital printing machines and CTP plates... so on .Our Products are base on the professional knowledge and experience accumulated in long terms. we are also continuously developing new products to meet customers' specific
If you need any support from us, please don’t hesitate to contact us.
Anytime anywhere anything, We can support you in 24-48 Hours
Best Regard
Chris Chan
MOBILE/WhatsAPP/Skype: +86 1730 1996 186
Email: Chriscolorte.com
Hometime: lesogprintgmail.com
ShenZhen Poly Colorte Printing CO.ltd/HongKong AM Print Co.Limited
Add: 4F, International Printing Industrial Area, 1 # Huahui Road, Dalang Street, LongHua District, Shenzhen , GuangDong,China 518109
Model | U8128 |
Exposing Method | External Drum |
Imaging System | 128-channel |
| Discrete 400-410nm laser |
Output Speed | 45 plates/hour |
| 1030×800mm 2,400dpi |
Plate Size | Max.1130×920mm,Min. 510×400mm |
Exposing Size | Max.1130×904mm |
Plate Type | UV plate, high-sensitive PS plate |
Plate Thickness | 0.15mm~0.3mm |
Resolutions | 2,400dpi |
Repeatablity | ±5μm(Continuous exposure over four times on the same plate with a temperature of 23°C and 60% RH) |
Interface | USB2.0 |
Plate Loading | Alternative autoload system |
Net Weight | 1,200KG |
Device Size | 2,010×1,410×1200mm(W×D×H) |
Power supply | Single phase:200V-240V; Max power(Peak value):4KW |
Environment | Recommended temperature: 21-25℃ Allowable temperature: 18-26℃ Humidity: <70% |
Technical Advantages:
1 Dynamic Autofocus
With the third generation of dynamic autofocus technology, the accurate position measuring system of Amsky equipments can directly detect such minute distance change as 0.1 microns. Driven by voice coil motor, they can also trace any change in focal length at an incredible acceleration of 30G in order to ensure the continuous accuracy of focal length. The combination of these unique features not only guarantees the deviation of density between any two spots is less than 0.3% in a full page of tint, but also avoids blue marks and blurs caused by tiny dusts on the drum surface.
2 Fast Balance&Auto Switch of Laser Beam
During the plate loading and unloading period, our laser beam balancing system can accomplish the detection and adjustments of all laser energy within few seconds. Laser power can be calibrated automatically before exposing plate every time without any influence in the speed of outputting plates, to ensure each laser burning one the plate with same power, all lines and screen spots are full and identical on every plate.
When any laser channel breaks down, laser beam auto switch system can continue outputting through the rest longest consecutive channel in order to ensure non-stop production and offer users stable and superior practical experience.
3 Auto Constant Thermostatic Control of Laser Chassis
The temperature control system in laser thermostatic shielding chassis can automatically make two-way adjustment to the inside temperature with a minimum accuracy of positive or negative 0.1 degrees. Under optimum temperature conditions, output of laser is more stable and the life of laser is greatly lengthened,
4 Technology of DDS Frequency Multiplication and Drum Auto Balance
The technology of DDS frequency multiplication ensures phase position to jitter within 0.03125 pixels and exposed lines to be both vertical and horizontal.
Auto balance system of drum takes no more than 5 seconds to adjust the drum balance block to a new position, instantaneously switching plates with different size.
5 Accurate Graphic Size Calibration
CTP with external drum has many advantages. However, multichannel scanning may cause the parallelograms distortion in the graphics. Amsky’s unique technology of graphic calibration enables graphics to present perfect rectangles and eliminates dimensional deviation caused by different thickness of plates.
The registering precision of one Amsky CTP is 5 microns. Between two, it can be within 15 microns after being calibrated.
1)Provide 2 years warranty for the machine.
2)Provide free replacement of accessories.
3)Provide free technical training and overseas installation.
we are selling the pre-printing Equipment , CTP,CTcp, digital printing machines and CTP plates... so on .Our Products are base on the professional knowledge and experience accumulated in long terms. we are also continuously developing new products to meet customers' specific
If you need any support from us, please don’t hesitate to contact us.
Anytime anywhere anything, We can support you in 24-48 Hours
Best Regard
Chris Chan
MOBILE/WhatsAPP/Skype: +86 1730 1996 186
Email: Chris AT colorte.com
Hometime: lesogprint AT gmail.com
ShenZhen Poly Colorte Printing CO.ltd/HongKong AM Print Co.Limited
Add: 4F, International Printing Industrial Area, 1 # Huahui Road, Dalang Street, LongHua District, Shenzhen , GuangDong,China 518109