Amazon top sale remote static shock pulse pet collar Importers to train obedient dogon
Dog training collar main features:
1; Long range up to 1200 meter in open field.
2. Train up to 3 dogs from the same transmitter
3. 10 levels each of static shock and Vibrate
4 .“Buzz” sound activated with a separate button
5. Two buttons “+” and “_” allow you to set your intensity
6. Dog Selection button allow you to select your dog
7. LCD digital display for 10 stimulation levels , vibrate levels and dog ID
8. Memory functions for stimulation level in transmitter.
9 Easy to operation with smooth button
10. Water-proof transmitter and receiver
11. LED low power indication, red light flash when battery level is low.
12. Fully functional multi-dog system
Features
Model | DT1200V |
Range | 1200 meters |
Frequency | 433MHz |
Transmitter size | 13.45*5.5*2.9CM |
Transmitter weight | 89 gram |
Receive collar size | 7.5*4.1*4.1CM |
Receive colar weight | 85 gram |
Strap type | 75CM length TPU strap |
Transmitter battery | 545mAh 3.7V Li-ion rechargeable battery |
Receiver battery | 650mAh 3.7V Li-ion rechargeable battery |
Receiver stand-by time | 75~80 hours |
Shock levels | 10 |
Vibration level | 10 |
Multi-dog system | Up to 3 dogs |
Waterproof level | Trsansmitter: IP6 ; Receiver: IP7 ,dog can swim |
Certification | CE&Rohs |
Warranty | 2 years |
choose you'll need
Receive collar
Transmitter
“ +” and “-“ button: press these buttons to adjust the shock intensity from 1 to 10 levels
“On/Off” button: it is the power switch;
“BZ” button: no-stimulation warning buzz
“Shock” button: Emit shock stimulation .
“Vibration” button: Emit Vibrate stimulation .Press button ,only emit one static shock .
“1,2,3” button: dog selection switch , The default is “1”. You select 1 dog, LCD display dog ID
“A XX”. If you want to train 2 dog, press “2” button , LCD will display “BXX” If you want to train 3
dog, press “3”button again, LCD will display “C XX”. The "XX" is show the shock level .
Momoreize shock level : The Transmitter will memorize the shock level . When you power off
the transmitter , then turn it on .The different shock level will show in transmitter.
Transmitter Charging: The LCD display “CHA” when charging. The LCD display “FUL” when the
transmitter is full charged . The LED light will flash if the battery is low
Packing:
Packing list: | 1*Transmitter 1*Receive Collar 1*5V1000mA DC Adaptor 1*5V1A Car Travel Charger 1*TPU Strap 1*Test Lighter 1*2 Pins USB Cable 1*Lanyard for Transmitter 1*Manual 2*Long Prongs 2*Short Prongs 1*Spanner for changing prong |
Package: | Each packing in plastic tooling box |
QTY/CTN | 20 pcs |
CTN Size | 69X56X43cm |
FAQ:
Problem#1: No stimulation when a transmitter button is pressed.
The receiver has not been activated. The receiver must be turned on or it won’t work at all.
The receiver has not been set to your transmitter. Follow the instruction on page6.
The batteries in either the receiver or the transmitter are dead. Recharge or replace, as needed.
You are using the wrong transmitter. Check the transmitter.
Problem#2: The Beeper of Receiver doesn’t make any sound when the Receiver is turned on.
The battery in the Receiver has run down. Recharge as needed.
Loose battery connection. Send to sevice center to replair
1. We're R&D factory specialized in dog training collar for 7 years