Aluminum sheet 0.2mm
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al | ||
Content | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.05 | 0.15 | Remain | ||
Alloy | Specified | Tensile | Yield | Elongation | ||||||||
Thickness(mm) | (MPa) | (MPa) | (%) | |||||||||
1050-O/ 1050-H111 | 0.2-0.5 | 65-95 | Min20 | Min20 | ||||||||
0.5-1.5 | Min22 | |||||||||||
1.5-3.0 | Min26 | |||||||||||
3.0-6.0 | Min29 | |||||||||||
6.0-12.5 | Min35 | |||||||||||
12.5-80.0 | ||||||||||||
1050-H112 | 6.0-12.5 | Min75 | Min30 | Min20 | ||||||||
12.5-80.0 | Min70 | Min25 | ||||||||||
1050-H12 | 0.2-0.5 | 85-125 | Min65 | Min2 | ||||||||
0.5-1.5 | Min4 | |||||||||||
1.5-3.0 | Min5 | |||||||||||
3.0-6.0 | Min7 | |||||||||||
6.0-12.5 | Min9 | |||||||||||
12.5-40.0 | ||||||||||||
1050-H14 | 0.2-1.5 | 105-145 | Min85 | Min2 | ||||||||
1.5-3.0 | Min4 | |||||||||||
3.0-6.0 | Min5 | |||||||||||
6.0-12.5 | Min6 | |||||||||||
12.5-25 | ||||||||||||
For its content above in the chart, 1050 aluminum sheet/coil has high ductility and high reflective finish. Besides, 1050 aluminum sheet/coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminum sheet/coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum sheet/coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier