Aluminum foil insulation foam facing for thermal insulation
PRODUCT DESCRIPTION
Radiant Barriers and Reflective Insulation Systems
Double side insulation systems, as Radiant barriers and Reflective insulation work by reflecting radiant heat.
D/S Reflective Aluminum foil Radiant barriers are installed outside the Glass wool, Rock wool, mineral wool, foam insulation materials.
It is excellent as radiant barriers, flame retardant and vapor barriers can reduce energy loss costs 5% to 10%.
Flame-retardant CM Grade Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer F/R Kraft paper.
These layers are bonded together with F/R Glue and reinforced with 3-way fiberglass scrim. It is ideally used as sarking
and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building.
Combining with glass-wool /rockwool/ mineral wool/ foam insulation, it is excellent as a vapor barrier and reflective foil insulation for air-conditioning ducts, pipes and vessels.
The best kitchen venting systems exhaust greasy cooking fumes, steam and odors all the way to the exterior of the home.
To prevent damaging cooking fumes leak before Ductwork conveying exhaust to an outside vent, kitchen
vent ducts must be adequately sealed with HVAC Foil tapes. Air drawn directly from the stovetop may be hot,
moisture-laden and present a challenge to duct sealing methods.
FACING COMPOSITION
Composition |
Description |
Value (English) |
Value (Metric) |
Foil |
Aluminum |
0.28 mil |
7 micron |
Reinforcing-MD |
Fiberglass |
2/inch |
8/100mm |
Reinforcing- XD |
Fiberglass |
3/inch |
12/100mm |
Adhesive |
Flame-Retardant Glue |
|
|
Kraft |
Flame-Retardant |
55.2Ibs/3000ft2 |
90gsm |
Adhesive |
Flame-Retardant Glue |
|
|
Foil |
Aluminum |
0.28 mil |
7 micron |
TYPICAL PHYSICAL PROPERTIES
Physical properties |
Test Method |
Value (English) |
Value (Metric) |
Basis weight |
Scale |
28.6Ibs/1000ft2 |
140gsm |
Permeance (WVTR) |
ASTM E96, Procedure A |
0.02 perm |
1.15 ng/N.s |
Tensile Strength-MD |
ASTM D828 |
45 lbs / In |
200 N/25mm |
Tensile Strength-XD |
ASTM D828 |
25lbs / In |
110 N/25mm |
Burst Strength |
ASTM D774 |
75.4psi |
52 N/cm2 |
Low temperature Resistance |
ASTM D1790 4 hrs @ -40℉ (-40℃) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
High temperature Resistance |
ASTM D1790 4 hrs @ +240℉ (+116℃) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
Related Products
About Us
Plant Equipment
Our customers
FAQ
Q:What certificates you have for your products?
A:We have some patents and SGS certificates for our products.
Q:What is your payment method?
A:We prefer to T/T, 30% deposit and the balance 70% paid off before shipment.
Q:Can we make an small order?
A:Yes, we can accept small order, but there won't be discount.
Q:What is the lead time?
A:As usual, we will complete the delivery within 15 days after your order.
Q:Can i get some samples for testing before placing order ?
A:Yes, we can provide you some free samples for your reference if you would like to bear the express cost.
Q:Can you make other sizes and packages for this product?
A:Yes, we can make other sizes as your requirement, normally our quotation will contain the common package.
If you need your own packages, you'd better advise your requirement ahead of time for an accurate quote.
Q:What is your Policy for the quality problems?
A:After our products are confirmed have quality problems, we are agreed to return all of your money.