Aluminum dual- Bay 3.5" USB 3.0 hdd case for 3.5inch sata hard drive disk 2 bay raid typec raid enclosure
Product Feature:
Blueendless Portable USB 3.0 3.5 Hdd Enclosure for Notebook Desktop PC
Aluminum Design and support Hot-swap Plug & play, without Drives
12V2.5A Power Adaptor with good quality
Power and HDD Work LED indicator
CE/FCC/ROHS Certification
US/EU/UK/AU plug available
Specification:
1) Color: Black
2) Case Material: Aluminium
3) Transfer Speed: USB3.0 support to 5Gbps
4) Internal interface: SATA
5) Suitable for 3.5" hard disk to 24TB.
6) Requirements:(Supports Win SE / ME / 2000 /XP/Vista/Win 7 or later versions)
7) Secondary oxidation process
8)Front power switch
9) Equipped with LED indicates power
10) Plug and play Hot swapping without rebooting
11)Accessories: Package,Manual,USB3.0 cable,Power adapter.power cord,screws,screwdriver
Products Picture:
Packing content:
x1 RAID Enclosure
x1 AC power adapter
x1 USB3.0 cable
x1 User manual
x1 Screws pack
x1 Screwdriver
x1 Power cord
Shipment:
For sample order,UPS,Fedex,DHL and other Express for choose,it usually takes 3-5 days.
For Batch order, We can flexibly arrange Air or Sea shipment according weight of products.
Payment:
For sample order, Paypal and West Union can be choose.
For batch order,TT support.
Advantage:
Company introduction:
Blueendless Electronics Company was founded in 2004 as OEM manufacture of HDD Enclosures,WiFi HDD Enclosure,Power banks,Wireless power banks & chargers,etc... Our products are with superior quality,and were sold to all over the world. Our production is 10000pcs per week,and with our expert in design,we can provide products with good package to all kinds customers
Company Overview:
1. My computer system is WIN98. Why can’t my computer identify my USB disk? |
A: Startup the computer, enter the BIOS setup, check whether the relevant options of USB in BIOS are opened: set OnChip USB as Enabled; set USB Controller as Enabled; set PNP OS Installed as YES; set Assign IRQ For USB as Enabled. USB device to make preparations for the system to identify USB device. To use it in WIN98 system, a correct driver needs to be installed; otherwise it cannot be identified by the system. The driver can be obtained in the attached CD or related website. |
2. Why is my USB disk clicking and cannot be identified? |
A: It is likely the USB interface is lack of power supply. The power of USB disk is large and requires rigid voltage. The front USB interface is connected to the computer via cable and consume large amount of voltage while transferring. Therefore, it is advised to connect the USB disk to the USB interface of the rear mainboard. It is also possible that the front USB wire is connected in a wrong way. Provided that there are two AM heads at the matched USB wire, both AM heads can be connected to the computer to try if it works. It is suggested to use the matched USB wire provided by the factory since the USB wire with poor quality or large length can affect regular service. |
3. My computer cannot identify the USB disk, or it can identify the icon of the USB disk but cannot open it or use it. Further more, whenever the USB disk is plugged in the system works slower. Why is that? |
A: It should be because of the USB lack of power supply. Please connect to AC adapter if the USB disk has DC power adapter. If there is no DC adapter jack, it is suggested to connect to a USB HUB with power supply (i.e. a USB HUB with DC power supply) in order to offer sufficient power supply. |