Aluminum Panel Garage Doors Plesiglass or Tempered Glass Full Vision

Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.

The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).

Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . Industrial sectional door systems produces in accordance with the transition range and the height in the factory buildings or warehouses.

Industrial sectional doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).

The panels are standard white (RAL9002 inner side, outer side RAL 9002) of industrial sectional door systems can also be applied in different RAL colors in accordance with the exterior of the building. Sectional doors play an active role in vehicle and pedestrian traffic and also can applied with standard buttons, pull-chain type of manual or remote control.Industrial sectional doors consists of steel sandwich panels.Sandwich panels is achieved by injecting polyurethane with high-pressure between the galvanized steel sheets.Provided excellent heat insulation thanks to the high-pressure polyurethane.In the door panels can be opened double-walled acrylic glazed windows for lighting.

Between the door panels, top, sides and bottom is a black gaskets preventing air, rain, dust and wind pass through and provides a high degree of impermeability.All panels have finger safety system.

Standard safety edge The safety edge device is integrated together with a transmitter and receiver in the door’s bottom rubber seal. If the signal is broken by an object or person, the door will stop and retract. The maximum contact pressure for the rubber seal is 40 kg. Choose the predictive obstacle safety edge if you have products that cannot withstand that level of pressure.

Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.

While a wicket door can be built into an PANEL or ALU  door, we recommend that wherever possible pedestrian traffic and goods traffic be kept apart. In other words, a permanent wicket door in the façade, separate from the sectional door, or a permanent wicket door next to the sectional door. The wicket door can be built into the sectional door, but this may affect the door’s stability. It also presents limitations in terms of the door’s width, height and threshold height, as a result of which the gate may not meet the current legal requirements for an emergency exit. Always discuss your plans with the local authorities so you can be sure you’re choosing the right wicket door.

Prevent dust,air,rain water transition to the inside with the thermoplastic seals between panels

Traction motor system with Italian technology on CE and 9001 standards is used in garage doors.It Works very quitly. The desired number of remote control can be encoded. The door can open easily with manually when the power failure. Window with double-walled rectangular section can be applied to the garage door panels.

·         Isodoor panels  were tested in Europe at 2014 according to the  ISO EN 13241-1 quality management system by SP company and has been succesful.

·         The door panels are  41 mm thick (0,5 mm galvanized steel + 50 m3 polyurethane + 0,5 mm galvanized steel)

·         There are  weatherstrips between the two panels.

·         Inner and outer sheets of the panels are fixed to separation

·         Two panels are joined by  hinge and have been the integral structure

·         Polyurethane CFC freeand protects your door of mildew and bacteria

·         Heat transfer coefficient of the panels are 0:50 W / m² • C.

·         Polyurethane filler density of 50 m3

·         Polyurethane fillers average thermal conductivity of 9,97 C degrees at 0,017Kcall/(m.K)

·         Wind resistance of polyurethane filler is EN 12444, 12427 Std, Class en 12424 and Class3.

·         The waterproofing value is  EN 12425 class2.

·         Air permeability value is EN 12426, EN12427Std, class EN12424 class2

·         Panels has a finger-safe protection

·         Weight of panels are 11 kg/m2

·         When the doors length higher than 6 m, reinforcment profile are used on the doors.

·         Spring are galvanized or painted.

·         Cable is cut to lenght and assembled Aircaft, 6x19=114 steek wire with PP core

·         The shafts used in door are galvanized.

·         Spring wire has after coiling , received heat treatment.Also available in power coated or natural And fix-to-size assembled.

·         Door rails and brackets , made of 2 mm galvanized metal

·         Door rail profile has a special twist.This twist keeps wheel in the rail.

·         Bracket and rail profile are connected to the pneumatic clamping and It has strong structure

·         Whells which is located in the rail an edge of the doors are fabricated by polyamid and these polyamid prevents noise

·         Doors have opto-laser safety systems which is bottom of doors in plastic gasted. When doors are closing, if you have small soft touch, door can open to up side.

·         There is a combination section that is located between door panels and is useful for impermeability and also there is a rubber seal though integrated panel.

·         A rubber outer seal ring with double-lipped which is useful dor impermeabilty and also protects flexibility until 30 degree is located between door panel and upperwall and sidewall

·         There is a special porus flexible roving which provides impermeability between door panel and floor and it enables the door to lock on the ground and also this roving is situated into profile of the door’s lower panel.

• Low MOQ: One set is available for checking our quality first conveniently.
• Good Quality: Your client satisfied on our quality. You can get good reputation from your market and obtain more orders.
• Good Service: Our professional service before and after sale.
• The reasonable price
• Fast & Cheap Delivery: We have big discount from forwarder (Long Contract).
• OEM is welcome 

All ISODOOR garage doors and operators are manufactured according to the strict quality management system DIN ISO 9001.

All ISODOOR sectional garage door systems meet the high safety requirements for the European garage doors product standard EN 13241-1.

All ISODOOR garage doors and operators are tested by recognized institutes both individually and in combination.

1, Are you manufacturer?

Yes,We are one of the professional manufacturer of sectional door,we have professional team of workers ,service and inspection system.

2, How to order a sample?

We have small sample in stock, it is free of charge, you just need to handle with the freight.

3, What are your main products?

The main products are sectional doors and sandwich panels,we can offer different material panel with sectional,such as garage door,industrial door,aluminium full vision door.

4, What is Minimum Order Quantity?

10 set garage door or 1000 meters sandwich panel.

5. Where is your factory?

We are located in Kayseri, it is very close to Istanbul,only takes a hour by plane.

The address is Mimarsinan Organized Industrial Zone 9. Street No:1 Kayseri / Turkey