Aluminum Alloy Wheel Scrap/Cast Aluminum wheel scrap

Our product is clean and free from rust as you can see from the specifications below.

1. Alloy: 6063-T5/T6
2. Length: 3-6.5 m
3. Normal anodizing thickness: 8 to 12 micro
4. Normal powder coating thickness: 60 – 100 micro
5. Tensile Strength: ≥160 MPa
6. Yield strength: ≥110 MPa
7. Extensibility: ≥8%
8. Hardness (HW): ≥8
 Aluminum 
identical
Chemical Element % Present Metal Alloy
Manganese (Mn)........ 0.0 - 0.10
Iron (Fe)...................... 0.0 - 0.35
Magnesium (Mg)........ 0.45 - 0.90
Silicon (Si).................. 0.20 - 0.60
Zinc (Zn)..................... 0.0 - 0.10
Titanium (Ti).............. 0.0 - 0.10
Chromium (Cr)............0.0 - 0.10
Copper (Cu)................ 0.0 - 0.10
Other (Each).............. 0.0 - 0.05
Others (Total)............ 0.0 - 0.15
Aluminum (Al) Balance
Purity: 99% Minimum

Packaging: 40 feet container

The Aluminium Scrap should be free from ferrous and other material such as plastic, iron, zinc and others.

Aluminium Bike Wheels

Aluminium Castings

Aluminium Engine Block

Aluminium Ex-Machining

Aluminium Extrusion

Aluminium Foil

Aluminium Lithographic Sheets

Aluminium Piston Scrap

Aluminium Plates

Aluminium Radiator

Aluminium Wheels

Aluminum Cans (UBC)

Aluminium Brake Shoes

Aluminium Cuttings

Aluminium Lithographic Sheets (Small Pieces)

Aluminium Pans and Pot

Aluminium Taint Tabor

Aluminium Tense (Mixed)

Aluminium Tense

Aluminium Wires

Aluminium Tough Taboo