AllTest Multi-Drug Rapid Test 2-Step Urine Cup B2

Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.

1. Bring the pouch to room temperature before opening it. Remove the cup from the sealed pouch and use it within one hour.

2. Collect specimen in the cup and secure the cap tightly.

3. Check the temperature label (Temp Label) up to 4 minutes after specimen collection. A green color will appear to indicate the temperature of the urine specimen. The proper range for an unadulterated specimen is 32-38°C (90-100°F).

4. Check the cap for a tight seal; remove the key from the cap.

5. Place the cup on a flat surface, and push the key into the socket of the cup to begin the test. Start timer.

6. Remove the peel-off label covering the test results and wait for the colored line(s) to appear.

Read results at 5 minutes. Do not interpret results after 10 minutes.

1. Wait for 5 minutes, then cup back more than 90º;

2. Wait for 5 seconds.

3. Read window adown, and then flat on the reader, scanning.