ALKYD RESIN
Code:E1302-AJ
Product Describe
Alkyd resin is a condensed vinegar polymer, its synthetic raw materials are polyfunctional alcohols, polybasic acids and vegetable oils or fatty acids, with polyester as the main chain, side chains are unsaturated fatty acids, residual warp groups or groups The molecular weight of the chain is lower. Alkyd resin curing is achieved by condensation of side chain unsaturated fatty acids or other groups with other resins.
Typical Properties
appearance: Yellow lumps or yellow granules
performance: It has the characteristics of weather resistance, good adhesion, brightness and fullness, and is convenient for construction. But the coating film is soft, water resistance, alkali resistance is poor, alkyd resin and other resins can be made into a variety of different properties of self-drying or baking enamel, primer, topcoat and varnish.
Solid ratio:>99%
solid content: over 85%
physico-chemical property: Solution of phthalic anhydride polycondensation in no. 200 gasoline solvent
Application/Uses
Widely used in wood varnish raw materials, Bridges and other buildings as well as machinery, vehicles, ships, aircraft, instruments and other coating.
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
product packaging:
Paper plastic composite bag, or neutral packaging bag; Part of the product model for the drum (the specific packaging requirements according to customer and decided).
matters need attention:
he product should be stored and kept under the conditions of anti-insolation, moisture-proof and room temperature. Prevent open flame and excessive accumulation; During loading, unloading and transportation, it shall be rain-proof and hook-proof.
Hazardous characteristics of flammable, flash point 23 ~ 61 ℃.Meet high temperature, open fire, oxidizer to cause combustion danger.The pyrolysis product of the resin is toxic.
Identify accident types: fire, poisoning, container burst.
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |