C2TES2 Flex Tile Adhesive is a Two component, highly deformable, high adhesive, with extended open time which is easy to trowel with no vertical slip and an extremely high yield, for fixing large sizes ceramic tiles and stone materials, and especially for substrates with vibration, shrinkage or deflection.
1.Excellent ability to cope with deformation in the substrate and tiles
2.Will accommodate movement within the substrate
3.Adheres well to most waterproofing membranes
4.Will absorb vibration and reduce sound transmission
1.For treated timbers, hardwood timbers or timbers which exude resins/tannins, initially install a fiber cement sheet tile underlay.
2.For fixing tiles onto plasterboard, fiber cement sheeting, timber floorboards, structural composition board or marine grade plywood, concrete, cement renders/screeds, brickwork, blockwork, old ceramic tiles and particular waterproofing membranes.
3.For both walls and floors, interior and exterior applications.
1.C2TES2 Flex Tile Adhesive is a two-part adhesive for on-site mixing.
2.A 25kg/2.5kg unit the mixing ratio is 25kg of C2TES2 Flex Tile Adhesive powder to 2.5kg of C2TES2 Flex Tile Adhesive liquid and 5L water.
3.Add the powder slowly into the liquid while mechanically stirring to ensure a uniform mix results.
4.Allow the mixture to stand for 10 minutes, remix and then apply.
APPLICATION DATA (@ +23°C - 50% R.H.) | |
DENSITY OF THE MXI (KG/M3): | 1,200 |
POT LIFE OF MIX: | more than 8 hours |
OPEN TIME (ACCORDING TO EN 1346): | > 30 minutes |
ADJUSTMENT TIME: | 45 minutes |
GROUTING TILE JOINTS ON WALLS: | after 4-8 hours |
GROUTING TILE JOINTS ON FLOORS: | after 24 hours |
SET TO LIGHT FOOT TRAFFIC: | 24 hours |
READY FOR USE: | 14 days |
CLASSIFICATION | BS EN 12004 Type C2TE S1 |
RESISTANCE TO ALKALIS: | excellent |
RESISTANCE TO OILS: | excellent (poor with vegetable oils) |
RESISTANCE TO SOLVENTS: | excellent |
IN SERVICE TEMPERATURE RANGE: | from -30°C to +90°C |
DEFORMABILITY ACCORDING TO EN 12002: | S1 - deformable (> 2.5 mm, < 5 mm) |
BOND STRENGTH ACCORDING TO EN 1348 (N/mm2): | – initial bond (after 28 days): 2 – bond after application of heat source: 2 – bond strength after immersion in water: 1.3 – bond strength after freeze-thaw cycles: 1.5 |
Gomix Building Materials (Guangzhou) Co., Limited specializes in the manufacturing and exporting of Tile Adhesive (thin set), Tile grout (tile joint filler), Wall putty (skim coat), Waterproofing slurry (cement based waterproofing), Thermal insulation materials (EPS/XPS board adhesive and base coat, fiber glass mesh, finish coating, etc), Textured coating (stucco, powder paint and acrylic textured paint), Emulsion paint (water based paint) cement admixture and so on.
Gomix Building Materials (Guangzhou) Co., Limited operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials.
Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process. GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
1.About Sample
We provide free sample for test.
2.OEM,ODM service available
3.According to customer's request,packing with pallet or without pallet
Tile adhesive(20kg/bag)packing with pallet specification:
64 bag/pallet = 1.3 MT/pallet
68 bag/pallet = 1.36MT/pallet
One full 20ft container max loading 27.5MT
wth pallet can load 1320 bags, without pallet can load 1375 bags