Welcome to TradeChina
AliGan Dental equipment steam sterilization autoclave for B class white box hard 23 liter LCD touch screen use in medical lab
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
“AAA”accredit by ALIBABA. The higest grade,
among TOP 5% supplier in integrity
pls roll down to FAQ section for details
The autoclave is computerized, user friendly and easy to operate. Its real time display shows all data during the sterilization cycle. The software program provides auto diagnostics, protection against over heating or over pressurizing, and thus ensures reliability of the sterilization results. Built-outside used water collecting system prevents discharge of waste steam and keeps the machine clean and safe.
capacity | 23L |
control panel | LCD |
Dimension | 755*625*550mm |
Chamber Volume | 250mm x L450MM |
Power Consumption | 230V/240V/50Hz,2300W |
Sterilization Temperature/Pressure | 121 C (1.0-1.3)bar/134 ℃ (2,0-2,4)bara |
Safety Design | Safety Valve,Interlock Door,Sensors Protection |
Weight | 59kgs |
Water tank capacity | 3.5L |
Operation temperature | +5℃~+40℃ |
Relative humidity range | 30%~75% |
LCD Control panel
Installation drawing
Circuit connection chart
Pyplyn diagram
Trouble shooting
1.During venting or drying if a thump sounds it means that the Condensed water collector is full.You must drain the water from the tank
2.During a cycle if a banging sounds, steam leaks from the chamber door and the displays show an "E6" code. Please verify whether the door knob is properly turned and locked. If the steam leaks at the beginning of a cycle, you will need to change the seal according to instructions .
3. At the end of a cycle if, there are water drops on the instruments.You can correct the problems by:
1).Checking the drain filter is not blocked
2). Reduceing the load of the instrument in the chamber.( especially the porous and dressing and other water absorbent materials.)
3). Waiting for a while at the end of a cycle "Ed" for better drying result. The autoclave will continue heating the chamber until you open the door.
Important information
1. The autoclave must be installed on a leveled surface
2. When operated at an elevation of more than 500 meters the machine must be reprogrammed. Please get in touch with your
distributor for instructions.
3. Distilled water must be used for prolonging the life of the machine.
4. The ventilation openings in the machine must not be blocked or covered.
5. Instruments should be placed on tray with space between one another allowing steam to pass through.
6. Condensed water collector must be emptied from time to time. It should be emptied when refilling the water reservoir. (Draining
of the collector can be followed asper item 9.2)
7. Pls closing the door well while you use it
8. Never try to open the chamber door if and when the pressure display doesn't show 0.0.
9. Before any kind of maintenance turn off the power to the autoclave and allow it to cool down
10. DO NOT drag the autoclave when it is being moved
11. Power connection must be grounded properly
12. Must be provided enough power (22L:2300W; 17L:1800W).
13. If the ambient temperature is low please pre-heat the autoclave without instruments for 30 minutes before sterilizing.
14. DO NOT power off the unit during sterilization. To abort a cycle during sterilization press the Start/Stop key for 3 seconds
15. The chart in the operation manual only for reference, which keep the actual product for real
1.During venting or drying if a thump sounds it means that the Condensed water collector is full.You must drain the water from the tank
2.During a cycle if a banging sounds, steam leaks from the chamber door and the displays show an "E6" code. Please verify whether the door knob is properly turned and locked. If the steam leaks at the beginning of a cycle, you will need to change the seal according to instructions .
3. At the end of a cycle if, there are water drops on the instruments.You can correct the problems by:
1).Checking the drain filter is not blocked
2). Reduceing the load of the instrument in the chamber.( especially the porous and dressing and other water absorbent materials.)
3). Waiting for a while at the end of a cycle "Ed" for better drying result. The autoclave will continue heating the chamber until you open the door.
Important information
1. The autoclave must be installed on a leveled surface
2. When operated at an elevation of more than 500 meters the machine must be reprogrammed. Please get in touch with your
distributor for instructions.
3. Distilled water must be used for prolonging the life of the machine.
4. The ventilation openings in the machine must not be blocked or covered.
5. Instruments should be placed on tray with space between one another allowing steam to pass through.
6. Condensed water collector must be emptied from time to time. It should be emptied when refilling the water reservoir. (Draining
of the collector can be followed asper item 9.2)
7. Pls closing the door well while you use it
8. Never try to open the chamber door if and when the pressure display doesn't show 0.0.
9. Before any kind of maintenance turn off the power to the autoclave and allow it to cool down
10. DO NOT drag the autoclave when it is being moved
11. Power connection must be grounded properly
12. Must be provided enough power (22L:2300W; 17L:1800W).
13. If the ambient temperature is low please pre-heat the autoclave without instruments for 30 minutes before sterilizing.
14. DO NOT power off the unit during sterilization. To abort a cycle during sterilization press the Start/Stop key for 3 seconds
15. The chart in the operation manual only for reference, which keep the actual product for real
1.Q: Introduction on our company.
A: our company is accredit as “AAA” supplier by ALIBABA in 2020, among top 5% supplier in creditability. Established in 2005, we start as a professional manufacturer for dental equipment. We have extend the product range to medical, personal care and baby care products from 2018. Our products have been sale to over 50 countries under three brands AliGan, G11 & CoreDeep.
2.Q: Can you support on Amazon FBA fulfillment?
A: yes, we can support you to apply Amazon label and sent to Amazon warehouse all around the world. Please contact our sales team for details.
3.Q: do you have drop shipping service?
A: yes, we do have drop shipping service in most of our products, please contact our sales team for detail terms.
4.Q: can you support customize logo, package or even design?
A: yes, customize logo or package is one of our basic service, we have professional art designer to help you. We can also provide OEM or ODM service. There are some MOQ requirement for those service, please contact our sales team for detail terms.
5. Q: How about the guarantee and after sales service?
A: depend on product, we offer 1-3 year quality warranty. You can contact us for all detail technical questions, Our After-Sales department provide 7x 24hrs technical support. We will also send the warranty letter for more details if you need.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier