Alarm A9 Two way car alarm Mobile phone control A9 car GPS GSM car two-way anti-theft device upgrade gsm gps
"Mobile phone control" operation manual
Dear users, thank you very much for purchasing our controller products, we will be happy to help you. The operation method is as follows:
First, the product installation:
1. Technical parameters: controller working voltage 9V-15V, working temperature -40°-+80°, working current 150MA, SIM card specification 12*15mm, network standard GSM-2G communication card.
2, the product accessories are as follows:
3, you first need to buy a GSM system with a flow (GPRS) SIM card (this machine does not support WCDMA), SIM card gap is outside, inserted into the machine card slot.
4. Link the GSM antenna, link the GPS antenna, and link the 12V-2P power plug (the other end of the plug is inserted into the OBD interface). Note: The GPS antenna is recommended to be placed on the front windshield and laid flat.
5. After turning on the power, take out the QR code on the side of the mobile phone scanning package and download and install the app. Note that when installing the app, the phone needs to open all permissions, and the mobile phone housekeeper software is installed in the mobile phone. It is necessary to set the APP to allow the APP to receive push information.
6. After the APP installation is completed, registration begins.
Second, registration:
1. Please use Emaill to register, enter the ID number of the device (IMEI on the sticker on the back of the main unit), enter the license plate number, and the success will be reminded after successful registration;
2. Select the login button to log in to the device;
3. Click the icon to make the controller compatible with the original two-way anti-theft device. Before this, you need to adjust the original two-way anti-theft device into the remote control code mode. First, you can learn the original remote control. Click on the icon on the app for system compatibility. Once compatible, both the controller and the original two-way remote control can control the vehicle.
Third, the operation and use:
1, button explanation
Locking, unlocking, starting the car, remote control, turning off the flame, opening the rear trunk
Close-range navigation, car search, window, sound and light, search for cars, anti-hijacking mode
Set the temperature to start the car. Start the car at regular intervals.
In-vehicle temperature map refresh page illegal alarm prompt
2, temperature start settings:
Click on the main interface to enter the temperature start setting interface and set it according to your needs. The temperature can be arbitrarily chosen from -50° to +80. Once you have made your selection, click OK. If you want to cancel the already set temperature start function, you only need to click to cancel.
3, timing start settings:
Click on the main interface to enter the timed start setting interface, and set the start interval according to your own needs. The time can start from 10 minutes and 20 minutes (increase 10 minutes) to the maximum time interval of 24 hours. Timed start, you can cancel it automatically after setting it to the alarm clock, or you can cycle it. As shown below:
Fourth, the fault is removed:
1. Click in the lower right corner of the main interface to enter the service interface, click FAQ;
2. If you still can't solve the problem, please click to leave us a message and wait for our reply email.